NAS200

The NAS200 is a network-attached storage appliance intended for the consumer market. It was originally marketed by the Linksys division of Cisco Systems in 2007.[1]

The NAS200, the successor to the Linux-based NSLU2, has room for two internal SATA drives, a 10/100 Ethernet port, and supports FAT32-formatted external USB 2.0 drives. It comes with UPnP media-sharing software.

The NAS200 is built around a RDC semiconductor R3210-G a RISC-based System-on-a-chip that executes the Intel 80486 instruction set. The NAS200's stock firmware supports only Microsoft Windows networking (SMB). This firmware includes a Linux 2.6.19 kernel and uses an eCos-based boot loader.[2]

A PC Pro review said "transfer speeds were unimpressive" and found with average read speeds of 3.7 MB/s and average write speeds of 3.2 MB/s.[3] PC Magazine found it a little faster at 4.7 MB/s with 500Gb Seagate drives, but concluded it was too slow for movies.[4]

References

  1. "Network Attached Storage System with 2 Bays: NAS200". Cisco Systems. Retrieved June 9, 2011.
  2. Henry Kingman (September 6, 2007). "Linux-based SLUG spawns highly hackable NAS". LinuxDevices.com. Archived from the original on September 9, 2012.
  3. Matthew Sparkes (November 12, 2007). "Linksys NAS200". PC Pro. Archived from the original on June 19, 2009. Retrieved June 9, 2011.
  4. Oliver Rist (October 25, 2007). "Linksys NAS200". PC Magazine. Retrieved June 9, 2011.
  • "Linksys NAS200". nslu2-linux.org web site. April 26, 2008. Retrieved June 9, 2011.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.