MPEG-1 Audio Layer I

MPEG-1 Audio Layer I, commonly abbreviated to MP1, is one of three audio formats included in the MPEG-1 standard. It is a deliberately simplified version of MPEG-1 Audio Layer II, created for applications where lower compression efficiency could be tolerated in return for a less complex algorithm that could be executed with simpler hardware requirements. While supported by most media players, the codec is considered largely obsolete, and replaced by MP2 or MP3.

Not to be confused with MPEG-1.
"MP1" redirects here. For the video game sometimes abbreviated as MP1, see Mario Party (video game).
MPEG-1 Audio Layer I
Filename extension
.mp1
Internet media type
audio/mpeg,[1] audio/MPA[2]
Initial release1993 (1993)[3]
Type of formatAudio compression format, audio file format
Contained byMPEG-ES
StandardISO/IEC 11172-3,[3]
ISO/IEC 13818-3[4]
Websitehttp://mpeg.chiariglione.org/standards/mpeg-1/audio

For files only containing MP1 audio, the file extension .mp1 is used.

A limited version of MPEG-1 layer I was also used by the Digital Compact Cassette format, in the form of the PASC (Precision Adaptive Subband Coding) audio compression codec. The bit rate of PASC was fixed at 384 kilobits per second.

Specification

MPEG-1 Layer I is defined in ISO/IEC 11172-3, which first version was published in 1993.

  • Sampling rates: 32, 44.1 and 48 kHz
  • Bitrates: 32, 64, 96, 128, 160, 192, 224, 256, 288, 320, 352, 384, 416 and 448 kbit/s[5]

An extension has been provided in MPEG-2 Layer I and is defined in ISO/IEC 13818-3, which first version was published in 1995.

  • Additional sampling rates: 16, 22.05 and 24 kHz
  • Additional bitrates: 48, 56, 80, 112, 144 and 176 kbit/s[5]

MP1 uses a comparatively simple sub-band coding, using 32 sub-bands.[6]

gollark: That is not specific to the middle east.
gollark: The AST one sounds easier, do so.
gollark: ```osmarks@procyon ~> lsblkNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTmmcblk0 179:0 0 7.3G 0 disk ├─mmcblk0p1 179:1 0 2M 0 part ├─mmcblk0p2 179:2 0 2M 0 part ├─mmcblk0p3 179:3 0 1M 0 part ├─mmcblk0p4 179:4 0 1M 0 part ├─mmcblk0p5 179:5 0 1M 0 part ├─mmcblk0p6 179:6 0 1M 0 part ├─mmcblk0p7 179:7 0 4M 0 part ├─mmcblk0p8 179:8 0 8M 0 part ├─mmcblk0p9 179:9 0 8M 0 part ├─mmcblk0p10 179:10 0 4M 0 part ├─mmcblk0p11 179:11 0 1M 0 part ├─mmcblk0p12 179:12 0 1M 0 part ├─mmcblk0p13 179:13 0 1M 0 part ├─mmcblk0p14 179:14 0 1M 0 part ├─mmcblk0p15 179:15 0 1M 0 part ├─mmcblk0p16 179:16 0 2M 0 part ├─mmcblk0p17 179:17 0 20M 0 part ├─mmcblk0p18 179:18 0 5M 0 part ├─mmcblk0p19 179:19 0 1M 0 part ├─mmcblk0p20 179:20 0 16M 0 part ├─mmcblk0p21 179:21 0 16M 0 part ├─mmcblk0p22 179:22 0 200M 0 part ├─mmcblk0p23 179:23 0 1.5G 0 part │ ├─mmcblk0p23p1 254:0 0 94M 0 part /boot│ └─mmcblk0p23p2 254:1 0 1.4G 0 part /├─mmcblk0p24 179:24 0 150M 0 part ├─mmcblk0p25 179:25 0 9M 0 part └─mmcblk0p26 179:26 0 5.4G 0 part mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk mmcblk0rpmb 179:96 0 4M 0 disk ```android_partition_scheme_irl
gollark: The GTech™ ones, with infinite processing power but somewhat limited memory.
gollark: Oh, I mostly use an infinitely powerful computer.

References
  1. "The audio/mpeg Media Type - RFC 3003". IETF. November 2000. Retrieved 2009-12-07.
  2. "MIME Type Registration of RTP Payload Formats - RFC 3555". IETF. July 2003. Retrieved 2009-12-07.
  3. "ISO/IEC 11172-3:1993 - Information technology -- Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s -- Part 3: Audio". ISO. 1993. Retrieved 2010-07-14.
  4. "ISO/IEC 13818-3:1995 - Information technology -- Generic coding of moving pictures and associated audio information -- Part 3: Audio". ISO. 1995. Retrieved 2010-07-14.
  5. "MPEG Audio Frame Header". 2003-08-03. Archived from the original on 2015-02-08. Retrieved 2009-05-29.
  6. "The Free Dictionary: MPEG-1 audio layer 1".


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.