m-Cresol

meta-Cresol, also 3-methylphenol, is an organic compound with the formula CH3C6H4(OH). It is a colourless, viscous liquid that is used as an intermediate in the production of other chemicals. It is a derivative of phenol and is an isomer of p-cresol and o-cresol.[3]

m-Cresol
Names
Preferred IUPAC name
3-Methylphenol
Systematic IUPAC name
3-Methylbenzenol
Other names
3-Cresol
m-Cresol
3-Hydroxytoluene
m-Cresylic acid
1-Hydroxy-3-methylbenzene
Identifiers
3D model (JSmol)
506719
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.003.253
EC Number
  • 203-39-4
101411
KEGG
RTECS number
  • GO6125000
UNII
Properties
C7H8O
Molar mass 108.14 g/mol
Appearance colorless liquid to yellowish liquid
Density 1.034 g/cm3, liquid at 20 °C
Melting point 11 °C (52 °F; 284 K)
Boiling point 202.8 °C (397.0 °F; 475.9 K)
2.35 g/100 ml at 20 °C
5.8 g/100 ml at 100 °C
Solubility in ethanol miscible
Solubility in diethyl ether miscible
Vapor pressure 0.14 mmHg (20°C)[1]
-72.02·10−6 cm3/mol
1.5398
Viscosity 6.1 cP at 40 °C
Hazards
Main hazards May cause serious burns. Very destructive of mucous membranes. Harmful if inhaled. Toxic in contact with the skin or if swallowed.
Safety data sheet External MSDS
GHS pictograms
GHS Signal word Danger
GHS hazard statements
H227, H301, H311, H314, H318, H351, H370, H372, H373, H401
P201, P202, P210, P260, P264, P270, P273, P280, P281, P301+310, P301+330+331, P302+352, P303+361+353, P304+340, P305+351+338, P307+311, P308+313, P310, P312, P314, P321, P322, P330, P361, P363
NFPA 704 (fire diamond)
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
3
0
Flash point 86 °C
Explosive limits 1.1%-? (149°C)[1]
Lethal dose or concentration (LD, LC):
242 mg/kg (oral, rat, 1969)
2020 mg/kg (oral, rat, 1944)
828 mg/kg (oral, mouse)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 5 ppm (22 mg/m3) [skin][1]
REL (Recommended)
TWA 2.3 ppm (10 mg/m3)[1]
IDLH (Immediate danger)
250 ppm[1]
Related compounds
Related phenols
o-cresol, p-cresol, phenol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Production

Together with many other compounds, m-cresol is traditionally extracted from coal tar, the volatile materials obtained in the production of coke from (bituminous) coal. This residue contains a few percent by weight of phenol and isomeric cresols. In the cymene-cresol process, toluene is alkylated with propene to give isomers of cymene, which can be oxidatively dealkylated analogous to the cumene process. Another method, involves carbonylation of a mixture of methallyl chloride and acetylene in the presence of nickel carbonyl.[3]

Applications

m-Cresol is a precursor to numerous compounds. Important examples include:

C7H8O + C3H6 C10H14O

Natural occurrences

m-Cresol is a component found in temporal glands secretions during musth in male African elephants (Loxodonta africana).[7]

m-Cresol is a constituent of tobacco smoke.[8]

gollark: The 30-claim limit should be increased to 12895712985. I have too many claims apparently.
gollark: Observe, our end gateway research facility.
gollark: There's one under spawn I think.
gollark: That would be silly. We need to know positions just like everyone else, and you can't use the command computer getBlockPosition thing on a neural interface.
gollark: What about the secret GTech™ dimension accessible only via our hacked end gateway?

See also

References

  1. NIOSH Pocket Guide to Chemical Hazards. "#0155". National Institute for Occupational Safety and Health (NIOSH).
  2. "Cresol (o, m, p isomers)". Immediately Dangerous to Life and Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. Helmut Fiege (2007). "Cresols and Xylenols". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a08_025.
  4. Alan G. MacDiarmid and Arthur J. Epstein. 1995. "Secondary Doping in Polyaniline" Synthetic Metals 69 (85-92).
  5. Stroh, R.; Sydel, R.; Hahn, W. (1963). Foerst, Wilhelm (ed.). Newer Methods of Preparative Organic Chemistry, Volume 2 (1st ed.). New York: Academic Press. p. 344. ISBN 9780323150422.
  6. Asim Kumar Mukhopadhyay (2004). Industrial Chemical Cresols and Downstream Derivatives. New York: CRC Press. pp. 99–100. ISBN 9780203997413.
  7. Some chemical constituents of the secretion from the temporal gland of the African elephant (Loxodonta africana). Jack Adams, Alexander Garcia and Christopher S. Foote, Journal of Chemical Ecology, 1978, Volume 4, Number 1, 17-25, doi:10.1007/BF00988256
  8. Talhout, Reinskje; Schulz, Thomas; Florek, Ewa; Van Benthem, Jan; Wester, Piet; Opperhuizen, Antoon (2011). "Hazardous Compounds in Tobacco Smoke". International Journal of Environmental Research and Public Health. 8 (12): 613–628. doi:10.3390/ijerph8020613. ISSN 1660-4601. PMC 3084482. PMID 21556207.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.