Bar (unit)

The bar is a metric unit of pressure, but not part of the International System of Units (SI). It is defined as exactly equal to 100,000 Pa (100 kPa), or slightly less than the current average pressure at sea level (approximately 1.013 bar).[1][2] By the barometric formula, 1 bar is roughly the atmospheric pressure on Earth at an altitude of 111 metres at 15 °C.

This article is about the unit of pressure. For the informal unit of signal strength, see Mobile phone signal. For the unit of gold bullion weighing one kilogram, see Gold bar.
Bar
A pressure of 700 bar flattened this length of aluminium tubing, which had a wall thickness of 5 millimetres (0.20 in).
General information
Unit systemMetric system
Unit ofPressure
Symbolbar 
Conversions
1 bar in ...... is equal to ...
   SI units   100 kPa
   CGS units   1.0×106 Ba
   US customary units   14.50377 psi

The bar and the millibar were introduced by the Norwegian meteorologist Vilhelm Bjerknes, who was a founder of the modern practice of weather forecasting.[3]

The International Bureau of Weights and Measures (BIPM) lists the bar as one of the "non-SI units [that authors] should have the freedom to use", but has declined to include it among the "non-SI units accepted for use with the SI".[1] The bar has been legally recognised in countries of the European Union since 2004.[2] The US National Institute of Standards and Technology (NIST) deprecates its use except for "limited use in meteorology" and lists it as one of several units that "must not be introduced in fields where they are not presently used".[4] The International Astronomical Union (IAU) also lists it under "Non-SI units and symbols whose continued use is deprecated".[5]

Units derived from the bar include the megabar (symbol: Mbar), kilobar (symbol: kbar), decibar (symbol: dbar), centibar (symbol: cbar), and millibar (symbol: mbar). The notation bar(g), though deprecated by various bodies,[2] represents gauge pressure, i.e., pressure in bars above ambient or atmospheric pressure.

Definition and conversion

The bar is defined using the SI derived unit, pascal: 1 bar ≡ 100,000 Pa ≡ 100,000 N/m2.

Thus, 1 bar is equal to:

  • 1,000,000 Ba (barye) (in cgs units);

and 1 bar is approximately equal to:

  • 0.987 atm
  • 14.5038 psi absolute
  • 29.53 inHg
  • 750.06 mmHg
  • 750.06 Torr
  • 1019.72 centimetres of water (cmH2O).

Notes:

  • 1 millibar (mbar) = 1 one-thousandth bar, or 1×10−3 bar
  • 1 millibar = 1 hectopascal (1 hPa = 100 Pa).

Origin

The word bar has its origin in the Greek word βάρος (baros), meaning weight. The unit's official symbol is bar; the earlier symbol b is now deprecated and conflicts with the use of b denoting the unit barn, but it is still encountered, especially as mb (rather than the proper mbar) to denote the millibar. Between 1793 and 1795, the word bar was used for a unit of weight in an early version of the metric system.[6]

Usage
Map showing atmospheric pressure in mbar or hPa
A tire-pressure gauge displaying bar (outside) and pounds per square inch (inside)

Atmospheric air pressure is often given in millibars, where standard atmospheric pressure is defined as 1013.25 mbar, 101.325 kPa, 1.01325 bar, which is about 14.7 pounds per square inch. Despite the millibar not being an SI unit, meteorologists and weather reporters worldwide have long measured air pressure in millibars as the values are convenient. After the advent of SI units, some meteorologists began using hectopascals (symbol hPa) which are numerically equivalent to millibars; for the same reason, the hectopascal is now the standard unit used to express barometric pressures in aviation in most countries. For example, the weather office of Environment Canada uses kilopascals and hectopascals on their weather maps.[7][8] In contrast, Americans are familiar with the use of the millibar in US reports of hurricanes and other cyclonic storms.[9][10]

In fresh water, there is an approximate numerical equivalence between the change in pressure in decibars and the change in depth from the water surface in metres. Specifically, an increase of 1 decibar occurs for every 1.019716 m increase in depth. In sea water with respect to the gravity variation, the latitude and the geopotential anomaly the pressure can be converted into metres' depth according to an empirical formula (UNESCO Tech. Paper 44, p. 25).[11] As a result, decibars are commonly used in oceanography.

Many engineers worldwide use the bar as a unit of pressure because, in much of their work, using pascals would involve using very large numbers. In measurement of vacuum and in vacuum engineering, residual pressures are typically given in millibar, although torr or millimeter of mercury (mmHg) were historically common.

Engineers that specialize in technical safety for offshore petrochemical facilities would be expected to exclusively refer to explosion loads in units of bar or bars. A bar is a convenient unit of measure for pressures generated by low frequency vapor cloud explosions that are commonly considered as part of accidental loading risk studies.

In the automotive field, turbocharger boost is often described in bars outside the United States. Tire pressure is often specified in bars.

Unicode has characters for "mb" (㏔, U+33D4) and "bar" (㍴, U+3374), but they exist only for compatibility with legacy Asian encodings and are not intended to be used in new documents.

The kilobar, equivalent to 100 MPa, is commonly used in geological systems, particularly in experimental petrology.

"Bar(a)" and "bara" are sometimes used to indicate absolute pressures and "bar(g)" and "barg" for gauge pressures. This usage is deprecated and fuller descriptions such as "gauge pressure of 2 bar" or "2-bar gauge" are recommended.[2][12]

gollark: Australia did lose a war to emus, though, funnily enough.
gollark: If enough radiation is applied, the ship will no longer meaningfully exist.
gollark: ... several days?
gollark: If it gives them horrible radiation-related diseases which only actually have an effect a while after the battle, it's not that useful.
gollark: Not really.

See also

References
This article incorporates material from the Citizendium article "Bar (unit)", which is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License but not under the GFDL.
  1. International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 127, ISBN 92-822-2213-6, archived (PDF) from the original on 2017-08-14.
  2. British Standard BS 350:2004 Conversion Factors for Units.
  3. "Nomenclature of the unit of absolute pressure, Charles F. Marvin, 1918" (PDF). noaa.gov. Archived (PDF) from the original on 29 April 2017. Retrieved 6 May 2018.
  4. NIST Special Publication 1038 Archived 2016-03-19 at the Wayback Machine, Sec. 4.3.2; NIST Special Publication 811, 2008 edition Archived 2016-06-03 at the Wayback Machine, Sec. 5.2
  5. International Astronomical Union Style Manual. Comm. 5 in IAU Transactions XXB, 1989, Table 6
  6. Grave (unit)
  7. Canada, Environment (2013-04-16). "Canadian Weather at a Glance - Environment Canada". www.weatheroffice.gc.ca. Archived from the original on 2 January 2018. Retrieved 6 May 2018.
  8. Canada, Environment (2013-04-16). "Canadian Weather - Environment Canada". www.weatheroffice.gc.ca. Archived from the original on 2 January 2018. Retrieved 6 May 2018.
  9. US government atmospheric pressure map
  10. The Weather Channel
  11. Scientific Committee on Oceanic Research (1983). "Algorithms for computation of fundamental properties of seawater" (PDF). Archived (PDF) from the original on 2015-04-12. Retrieved 2014-05-11.
  12. "What do the letters 'g' and 'a' denote after a pressure unit? (FAQ - Pressure) : FAQs : Reference : National Physical Laboratory". Archived from the original on 7 April 2016. Retrieved 7 February 2016.
Pressure units
Pascal Bar Technical atmosphere Standard atmosphere Torr Pound per square inch
(Pa) (bar) (at) (atm) (Torr) (lbf/in2)
1 Pa ≡ 1 N/m2 10−5 1.0197×10−5 9.8692×10−6 7.5006×10−3 0.000 145 037 737 730
1 bar 105 ≡ 100 kPa

≡ 106 dyn/cm2

 1.0197 0.98692 750.06 14.503 773 773 022
1 at 98066.5 0.980665 ≡ 1 kgf/cm2 0.967 841 105 354 1 735.559 240 1 14.223 343 307 120 3
1 atm ≡ 101325 ≡ 1.01325 1.0332 1 760 14.695 948 775 514 2
1 Torr 133.322 368 421 0.001 333 224 0.001 359 51 1/760 ≈ 0.001 315 789 1 Torr

≈ 1 mmHg

 0.019 336 775
1 lbf/in2 6894.757 293 168 0.068 947 573 0.070 306 958 0.068 045 964 51.714 932 572 ≡ 1 lbf/in2
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.