Bombardier Itino

Bombardier Itino is a diesel multiple unit manufactured by Bombardier Transportation, originally developed by Adtranz. It has two or three cars and is capable of 140–160 km/h (87–99 mph). 40 units have been built and 17 more are on order. It is in service in Germany and Sweden.

Bombardier Itino
Y31 operated by Tåg i Bergslagen
In service2002 -
ManufacturerBombardier Transportation
Built atHennigsdorf
Constructed2002 -
Number built57
Formation2 or 3 cars
Line(s) servedGermany and Sweden
Specifications
Train length38.4 m (125 ft 11.8 in)
(2 cars)
54.7 m (179 ft 5.5 in)
(3 cars)
Doors4 (2 cars) 6 (3 cars)
Articulated sections2 or 3
Maximum speed140 km/h (87 mph)
Weight61.5 t (60.5 long tons; 67.8 short tons)
(2 cars)
82.5 t (81.2 long tons; 90.9 short tons)
(3 cars)
Prime mover(s)MAN
Engine typeDiesel engine
Power output1,280 kW (1,720 hp)
Power supply(?)
Track gauge1,435 mm (4 ft 8 1⁄2 in) standard gauge

Railways

Germany

In Germany it has been designated as DB Class 613 and is operated on Odenwaldbahn and Erfurter Bahn. 27 units have been ordered by the two railways.

Sweden

In Sweden the unit has the designation Y31 and Y32, the latter for the three-car formation. Seventeen units have been delivered and are operated by Jönköpings Länstrafik, Kalmar Länstrafik, Tågkompaniet, Värmlandstrafik and Västtrafik. The Itino is intended to replace the Y1 railcars.

Technology

The trains have two MAN diesel engines. The engines are based on truck engines, but larger (each 22 L (1,343 cu in)/cylinder volume), also used for boats and electrical generators. They have hydraulic transmission. From 2008 new trains will have two engines from Iveco (also based on truck engines) and they will fulfill the latest environmental requirements for trucks. They will have mechanical automatic gearboxes from ZF Friedrichshafen meant for trucks.

The distinctive angled window pillar bodyshell construction was previously introduced by ABB/ADtranz on the Regioshuttle.

Brake problems

The multiple unit got a bad start in Sweden, when it was shown that the brakes could not cope with snow. This has led to the model being suspended during the winter for oversight, which mostly affected "Tåg i Bergslagen" (and "SJ AB" which at the time was taking them into service) with its traffic on the Västerdalsbanan where the two first units were used. It has also from time to time affected other operators in Sweden. There has been a lot of other quality problems with these trains. The train traffic on Västerdalsbanan has been permanently replaced with buses from 2011.

  • Krösatågen Y32 at Nässjö C
  • Driver panel
  • Crash element
  • Second class seat
  • Side labels of an Itino in service of VIAS GmbH
gollark: Idea: chess, but continuous.
gollark: Fascinating idea.
gollark: ++delete <@356107472269869058> from existence with orbital orbit bees
gollark: Most of my bot stuff is open source and also we just mentioned it here?
gollark: Thanks!
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.