International distress frequency

An international distress frequency is a radio frequency that is designated for emergency communication by international agreement.

History

For much of the 20th century, 500 kHz was the primary international distress frequency. Its use has been phased out in favor of the Global Maritime Distress Safety System.

Use of some distress frequencies is permitted for calling other stations to establish contact, whereupon the stations move to another frequency. Such channels are known as distress, safety and calling frequencies.[1]

Satellite processing from all 121.5 or 243 MHz locators has been discontinued. Since February 1, 2009, the U.S. Coast Guard only monitors distress signals from emergency position indicating radio beacons (EPIRBs) that broadcast using digital 406 MHz signals.[2] Digital 406 MHz models became the only ones approved for use in both commercial and recreational watercraft worldwide on January 1, 2007.[3]

Maritime Mobile Service frequencies

International distress frequencies, currently in use are:

  • 2182 kHz for medium range maritime voice use. The US Coast Guard has said "beginning August 1st, 2013 the Coast Guard would no longer monitor 2182 kHz".[4] Many other MRCCs, for example most in Northern Europe, now only have MF capabilities and no HF.[5]
  • Several HF maritime voice frequencies exist for long-distance distress calls:[6]
    • 4125 kHz
    • 6215 kHz
    • 8291 kHz
    • 12290 kHz
    • 16420 kHz
  • Marine VHF radio Channel 16 (156.8 MHz) for short range maritime use
  • 406 MHz to 406.1 MHz is used by the Cospas-Sarsat international satellite-based search and rescue (SAR) distress alert detection and information distribution system

Digital selective calling frequencies

Several maritime frequencies are used for digital selective calling (DSC), and they are also monitored for DSC distress signals:[6][7]

  • 2.1875 MHz
  • 4.2075 MHz
  • 6.312 MHz
  • 8.4145 MHz
  • 12.577 MHz
  • 16.8045 MHz
  • 156.525 MHz, Marine VHF radio Channel 70

Aeronautical frequencies

Search And Rescue frequencies

  • 123.1 MHz: Aeronautical Auxiliary Frequency (International voice for coordinated SAR operations).
  • 138.78 MHz— U.S. military voice SAR on-the-scene use. This frequency is also used for direction finding (DF).
  • 155.160 MHz
  • 172.5 MHz— U.S. Navy emergency sonobuoy communications and homing use. This frequency is monitored by all U.S. Navy ASW aircraft assigned to a SAR mission.
  • 282.8 MHz— Joint/combined on-the-scene voice and DF frequency used throughout NATO
  • 406 MHz / 406.1 MHz - Cospas-Sarsat international satellite-based search and rescue (SAR) distress alert detection and information distribution system
  • Emergency position-indicating radiobeacon station (EPIRB)
  • Search and rescue transponder (SART)
  • Survival radio

Amateur radio frequencies

VHF, UHF calling frequencies can also be used to make emergency calls

Band Global Region 1
Europe, Africa
Region 2
The Americas[8]
Region 3
Asia
13 cm
23 cm 1294.500 MHz (U.S.)
33 cm N/A 927.500 MHz (U.S.) N/A
70 cm 433.500 MHz (EU) 446.00 MHz (U.S.)
1.25 m N/A 223.500 MHz (U.S.) N/A
2 m 145.500 MHz (EU) 146.520 MHz (U.S. & Canada) 145.000 MHz (Philippines, Indonesia & Thailand)
4 m 70.450 MHz (EU) N/A
6 m 52.525 MHz
10 m 29.600 MHz
12 m RTTY/Packet only

MF and HF frequencies

Band Global[9][10] Region 1[11]
Europe, Africa
Region 2[12]
The Americas
Region 3[13]
Asia
15 m 21360 kHz
17 m 18160 kHz
20 m 14300 kHz
30 m
40 m n/a 7110 kHz7060 kHz

7240 kHz 7275 kHz

7110 kHz
60 m n/a
80 m n/a 3760 kHz3750 kHz

3985 kHz

3600 kHz
  • Emergency/Disaster Relief Interoperation Voice Channels of the amateur radio Global ALE High Frequency Network:[14]
    • 3791.0 kHz USB
    • 7185.5 kHz USB
    • 10145.5 kHz USB
    • 14346.0 kHz USB
    • 18117.5 kHz USB
    • 21432.5 kHz USB
    • 24932.0 kHz USB
    • 28312.5 kHz USB

Other frequencies

  • Citizens band (CB) radio (not available in all countries)
    • Emergency channels 9 (27.065 MHz AM) and 19 (27.185 MHz AM)
  • GMRS: 462.675 MHz is a UHF mobile distress and road information calling frequency allocated to the General Mobile Radio Service and used throughout Alaska and Canada for emergency communications; sometimes referred to as "Orange Dot" by some transceiver manufacturers who associated a frequency with a color-code for ease of channel coordination, until the creation of the Family Radio Service, in 1996, "GMRS 675" or Channel 6/20 on mobile radios today. Its bandwidth can vary between 12.5, 25 and 50 kHz, and is also allocated to Ch. 20 on 22-channel FRS/GMRS "blister pack" radios. It can have a repeater input frequency of 467.675 MHz, and a tone squelch of 141.3 Hz. After FCC deregulation of simplex FRS/GMRS radios, FRS users may transmit up to 2 watts on the GMRS emergency channel 20 (462.675 MHz) with 141.3 Hz CTCSS, or channel 20-22.
  • MURS: 151.940 MHz (only available in the United States)
  • FRS: FRS channel 1: 462.5625 MHz (carrier squelch, no tone or sub-channel), channel 3: 462.6125 MHz[15] and channel 20: 462.6750 MHz (141.3 Hz CTCSS - channel 20, code 22 or channel 20-22).
  • UHF CB (Australia): Emergency channels 5/35 (476.525/477.275 MHz).[16] Channel 5 is the designated simplex and repeater output emergency channel, while channel 35 is used as the repeater input frequency for duplex operation. UHF CB is only available in Australia and New Zealand.
  • PMR446 (Europe): Channel 1 analog (446.00625 MHz, CTCSS 100.0 Hz, channel 1/12), Channel 8 analog (446.09375 MHz, CTCSS 123.0 Hz, channel 8/18).
gollark: Now to watch all the tests fail.
gollark: You know what, I'll ignore this ENTIRELY for now muahahahaha.
gollark: This is in a 130 line function which *kind of* explains what it's doing, but apiaristically.
gollark: It *seemed* like it was just inserting things, but it may also be moving everything after this into the children of the other thingy?
gollark: ```nim var emNode = newDoublyLinkedNode(emToken) for childNode in token.children.nodes: if childNode.value == opener.value.token: emToken.children.head = childNode.next if childNode.next != nil: childNode.next.prev = nil childNode.next = emNode emNode.prev = childNode if childNode.value == closer.value.token: emToken.children.tail = childNode.prev if childNode.prev != nil: childNode.prev.next = nil childNode.prev = emNode emNode.next = childNode```

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.