Indiana State Road 249
State Road 249 (SR 249) is a part of the Indiana State Road that runs between Portage and Burns Harbor in the US state of Indiana. The 2.42 miles (3.89 km) of SR 249 that lie within Indiana serve as an access to the Port of Indiana. None of the highway is listed on the National Highway System. Most of the road is an urban four-lane divided highway, passing through farmland, residential and industrial properties.
| ||||
|---|---|---|---|---|
| Crisman Road | ||||
 | ||||
| Route information | ||||
| Maintained by INDOT | ||||
| Length | 2.443 mi[1] (3.932 km) | |||
| Major junctions | ||||
| South end |  | |||
 | ||||
| North end |  | |||
| Location | ||||
| Counties | Porter | |||
| Highway system | ||||
| ||||
Route description
SR 249 heads north from the southern terminus at a traffic light with US 20. The highway is a four-lane divided highway, passing through commercial areas. The road has an interchange with I-94, 0.24 miles (0.39 km) north of US 20. After I–94, the route passes through residential properties and takes a sharp turn heading due east. During the curve, highway has a traffic light at Midwest Steel Access Road, with access to US 12. The road passes through farmland with a few industrial properties and begins to curves northeast. During the curve is an interchange with US 12. North of US 12 the road continues with SR 249, as George Nelson Drive and is only for traffic to and from the Port of Indiana. After George Nelson Drive passes over a set of railroad tracks is a permission gate.[2][3]
No segment of State Road 249 in Indiana that is included in the National Highway System (NHS).[4] The NHS is a network of highways that are identified as being most important for the economy, mobility and defense of the nation.[5] The highway is maintained by the Indiana Department of Transportation (INDOT) like all other state roads in the state. The department tracks the traffic volumes along all state roads as a part of its maintenance responsibilities using a metric called average annual daily traffic (AADT). This measurement is a calculation of the traffic level along a segment of roadway for any average day of the year. In 2010, INDOT figured that lowest traffic levels were 10,366 vehicles and 398 commercial vehicles used the highway daily north of Midwest Steel Highway. The peak traffic volumes were 21,253 vehicles and 817 commercial vehicles AADT along the section of SR 249 between US 20 and I–94.[6]
Major intersections
The entire route is in Porter County.
| Location | mi[1] | km | Destinations | Notes | |
|---|---|---|---|---|---|
| Portage | 0.000 | 0.000 | | Southern terminus of SR 249 | |
| 0.110– 0.367 | 0.177– 0.591 | | Exit number 19 on I-94 | ||
| Burns Harbor | 2.443 | 3.932 |  | Northern terminus of SR 249 | |
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
References
- Indiana Department of Transportation (July 2016). Reference Post Book (PDF). Indianapolis: Indiana Department of Transportation. Retrieved February 2, 2017.
- Google (October 25, 2018). "overview map of SR 249" (Map). Google Maps. Google. Retrieved October 25, 2018.
- Indiana Department of Transportation (2012). Indiana Transportation Map (PDF) (Map) (2011–2012 ed.). 1:550,000. Indianapolis: Indiana Department of Transportation. OCLC 765461296. Retrieved September 11, 2012.
- Federal Highway Administration (December 2003). National Highway System: Indiana (PDF) (Map). Scale not given. Washington, DC: Federal Highway Administration. Retrieved December 17, 2012.
- Natzke, Stefan; Neathery, Mike; Adderly, Kevin (September 26, 2012). "What is the National Highway System?". National Highway System. Federal Highway Administration. Retrieved December 17, 2012.
- Indiana Department of Transportation (2010). "Indiana Traffic Counts". Indianapolis: Indiana Department of Transportation. Retrieved December 17, 2012.