Harry Buford House

The Harry Buford House is a historic house located at 1804 North 30th Street in North Omaha, Nebraska. Built in 1929 in a Period Revival style, it was designated a landmark by the City of Omaha in 1983.[2]

Harry Buford House
Harry Buford House
LocationOmaha, Nebraska
Coordinates41°16′33″N 95°57′25″W
Built1929[1]
DesignatedApril 12, 1983[1]
Location of Harry Buford House in Nebraska

About

The Buford house is an anomaly, as it is a rare example of Period Revival style located in an inner city neighborhood such as the Near North Side of Omaha, rather than with the majority of houses of that style, which were being constructed in the then-new suburban neighborhoods of Country Club, Minne Lusa and Morton Meadows.

Harry Buford was an African American associate of the political organization of city boss Tom Dennison. Reportedly, the location of the Buford House on the west side of 30th Street indicated the status of the Buford family in Omaha during a time of racial segregation.[3]

gollark: They do have to spin pretty fast. There are sealed helium ones now.
gollark: > The HDD's spindle system relies on air density inside the disk enclosure to support the heads at their proper flying height while the disk rotates. HDDs require a certain range of air densities to operate properly. The connection to the external environment and density occurs through a small hole in the enclosure (about 0.5 mm in breadth), usually with a filter on the inside (the breather filter).[124] If the air density is too low, then there is not enough lift for the flying head, so the head gets too close to the disk, and there is a risk of head crashes and data loss. Specially manufactured sealed and pressurized disks are needed for reliable high-altitude operation, above about 3,000 m (9,800 ft).[125] Modern disks include temperature sensors and adjust their operation to the operating environment. Breather holes can be seen on all disk drives – they usually have a sticker next to them, warning the user not to cover the holes. The air inside the operating drive is constantly moving too, being swept in motion by friction with the spinning platters. This air passes through an internal recirculation (or "recirc") filter to remove any leftover contaminants from manufacture, any particles or chemicals that may have somehow entered the enclosure, and any particles or outgassing generated internally in normal operation. Very high humidity present for extended periods of time can corrode the heads and platters. https://en.wikipedia.org/wiki/Hard_disk_drive#Integrity
gollark: Interweb says it's to keep pressure equalized between the inside and out.
gollark: Ah yes, destroy it as an example to the others.
gollark: I find that threatening my electronics with a hammer or something works.

See also

  • Jack Broomfield
  • Architecture in North Omaha, Nebraska
  • History of North Omaha
  • Landmarks in Omaha

References

  1. "Landmarks Heritage Preservation Commission – List of Landmarks". Omaha Landmarks Heritage Preservation Commission. Retrieved 2013-03-03.
  2. (nd) Harry Buford House. City of Omaha Landmark Heritage Preservation Commission. Retrieved 6/2/07.
  3. Mead and Hunt. (2003) Reconnaissance Survey of Selected Neighborhoods in Omaha, Nebraska: Nebraska Historic Buildings Survey. City of Omaha. Retrieved 6/2/07.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.