GFM cloche

The GFM cloche was one of the most common defensive armaments on the Maginot Line. A cloche (bell) was a fixed and non-retractable firing position made of a thick iron casting which shielded its occupant. By comparison, turrets could be rotated and sometimes lowered so that only the top shell was exposed.

GFM Type A cloche at Ouvrage Molvange

GFM is an acronym for Guetteur et Fusil-Mitrailleur, (lookout and rifle-machine-gunner), which describes its purpose as a lookout and firing position for light weapons.[1] Most of the bunkers or blocks in a Maginot Line ouvrage were fitted with several fixed armoured cupolas or cloches. The cupolas were designed to allow the soldiers to perform reconnaissance or repel an attack with an absolute maximum of cover, from inside the bunker. The armament of each cloche varied significantly, but were typically equipped with some combination of:

Light machine guns or automatic rifles
Vision blocks
Mounted binoculars
A periscope (located on the top of the bell)
A 50 mm. mortar

Interior of a GFM cloche, looking upward at the Abri de Hatten

Description

The cloche consisted of two sections of cast iron: a lining or base that sat over a corresponding circular shaft in the concrete combat block, and the cloche itself, for the 1929 model 2.7 metres (8.9 ft) tall and 1.6 metres (5.2 ft) in outside diameter, projecting about 0.52 metres (1.7 ft) above a concrete apron. The apron sloped away from the cloche for drainage and to allow a depressed field of fire. The interior contained a platform arranged so that one occupant could fire from one of several openings in the 20-centimetre (7.9 in) thick bell. Firing openings were rectangular, and were fitted with a variety of shutters or firing ports, typically stepped to deflect shots away from the opening. A hose could be attached to the weapon to remove gun fumes. Ear-like lifting points projected to each side of the exposed portion of the cloche.[1]

Variants

There were two principal types of GFM cloche, each with a set of subtypes. The 1929 Type A cloche was the initial model, with a short variant, a longer version, a wider version, and a model that could accommodate two soldiers. The 1934 Type B cloche was larger in diameter, with thicker armor. The gun ports were redesigned to fire through a ball fitting that was more resistant to opposing fire. Some Type A cloches were fitted with the new ports.[1]

Periscope

Some GFM cloches possessed a shuttered fitting at the top of the bell through which a periscope could be raised.[1]

gollark: I think it can do USB boot too now.

gollark: Well, it boots off an EEPROM now, which loads a micro-SD card.

gollark: It just boots off a micro-SD card.

gollark: Strictly speaking, no.

gollark: It's the right order of magnitude, I think.

References

Mary, Jean-Yves; Hohnadel, Alain; Sicard, Jacques (2009). Hommes et Ouvrages de la Ligne Maginot, Tome 2 (in French). Histoire & Collections. pp. 65–68. ISBN 2-908182-97-1.

Bibliography

Mary, Jean-Yves; Hohnadel, Alain; Sicard, Jacques. Hommes et Ouvrages de la Ligne Maginot, Tome 2. Paris, Histoire & Collections, 2001. ISBN 2-908182-97-1 (in French)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[hetou2-1-1] Mary, Jean-Yves; Hohnadel, Alain; Sicard, Jacques (2009). Hommes et Ouvrages de la Ligne Maginot, Tome 2 (in French). Histoire & Collections. pp. 65–68. ISBN 2-908182-97-1.