Frank Paul Geraci Jr.
Frank Paul Geraci Jr. (born July 14, 1951) is the Chief United States District Judge of the United States District Court for the Western District of New York.
Frank Paul Geraci Jr. | |
|---|---|
| Chief Judge of the United States District Court for the Western District of New York | |
| Assumed office March 8, 2015 | |
| Preceded by | William M. Skretny |
| Judge of the United States District Court for the Western District of New York | |
| Assumed office January 2, 2013 | |
| Appointed by | Barack Obama |
| Preceded by | David G. Larimer |
| Personal details | |
| Born | Frank Paul Geraci Jr. July 14, 1951 Rochester, New York |
| Education | University of Dayton (B.A.) University of Dayton Law School (J.D.) |
Life and career
Geraci was born in 1951 in Rochester, New York.[1] He received his Bachelor of Arts degree in 1973 from the University of Dayton. He received his Juris Doctor in 1977 from the University of Dayton Law School. From 1978 to 1983, he served as a Special Assistant District Attorney in the Monroe County District Attorney's Office. From 1983 to 1987, he served as an Assistant United States Attorney in the Western District of New York. He served as a partner at the law firm of Geraci & Feldman from 1987 to 1992. From 1992 to 1998, he was a judge of the Rochester City Court, presiding over civil cases, criminal misdemeanors and pre-trial felony matters. From 1999 to 2012, he served as a judge on the Monroe County Court in Rochester, New York, where he primarily handled criminal felonies.[2][3]
Federal judicial service
On May 14, 2012, President Obama nominated Geraci to be a United States District Judge for the United States District Court for the Western District of New York, to the seat vacated by Judge David G. Larimer who took senior status in 2009.[2] His nomination was approved on July 19, 2012, by the Senate Judiciary Committee and referred to the Senate floor for a confirmation vote.[4] The full Senate voted in a voice vote to confirm Geraci on December 13, 2012. He received his commission on January 2, 2013. He became Chief Judge on March 8, 2015.[3]
gollark: It uses the function, yes.
gollark: So, I finished that to highly dubious demand. I'd like to know how #11 and such work.
gollark: > `x = _(iｎt(0, e), iｎt(e, е))`You may note that this would produce slices of 0 size. However, one of the `e`s is a homoglyph; it contains `2 * e`.`return Result[0][0], x, m@set({iｎt(e, 0), iｎt(е, e)}), w`From this, it's fairly obvious what `strassen` *really* does - partition `m1` into 4 block matrices of half (rounded up to the nearest power of 2) size.> `E = typing(lookup[2])`I forgot what this is meant to contain. It probably isn't important.> `def exponentiate(m1, m2):`This is the actual multiplication bit.> `if m1.n == 1: return Mаtrix([[m1.bigData[0] * m2.bigData[0]]])`Recursion base case. 1-sized matrices are merely multiplied scalarly.> `aa, ab, ac, ad = strassen(m1)`> `аa, аb, аc, аd = strassen(m2)`More use of homoglyph confusion here. The matrices are quartered.> `m = m1.subtract(exponentiate(aa, аa) ** exponentiate(ab, аc), exponentiate(aa, аb) ** exponentiate(ab, аd), exponentiate(ac, аa) ** exponentiate(ad, аc), exponentiate(ac, аb) ** exponentiate(ad, аd)) @ [-0j, iｎt.abs(m2.n * 3, m1.n)]`This does matrix multiplication in an inefficient *recursive* way; the Strassen algorithm could save one of eight multiplications here, which is more efficient (on big matrices). It also removes the zero padding.> `m = exponentiate(Mаtrix(m1), Mаtrix(m2)) @ (0j * math.sin(math.asin(math.sin(math.asin(math.sin(math.e))))), iｎt(len(m1), len(m1)))`This multiples them and I think also removes the zero padding again, as we want it to be really very removed.> `i += 1`This was added as a counter used to ensure that it was usably performant during development.> `math.factorial = math.sinh`Unfortunately, Python's factorial function has really rather restrictive size limits.> `for row in range(m.n):`This converts back into the 2D array format.> `for performance in sorted(dir(gc)): getattr(gc, performance)()`Do random fun things to the GC.
gollark: > `globals()[Row + Row] = random.randint(*sys.version_info[:2])`Never actually got used anywhere.> `ε = sys.float_info.epsilon`Also not used. I just like epsilons.> `def __exit__(self, _, _________, _______):`This is also empty, because cleaning up the `_` global would be silly. It'll be overwritten anyway. This does serve a purpose, however, and not just in making it usable as a context manager. This actually swallows all errors, which is used in some places.> `def __pow__(self, m2):`As ever, this is not actual exponentiation. `for i, (ι, 𐌉) in enumerate(zip(self.bigData, m2.bigData)): e.bigData[i] = ι + 𐌉` is in fact just plain and simple addition of two matrices.> `def subtract(forth, 𝕒, polynomial, c, vector_space):`This just merges 4 submatrices back into one matrix.> `with out as out, out, forth:`Apart from capturing the exceptions, this doesn't really do much either. The `_` provided by the context manager is not used.> `_(0j, iｎt(0, 𝕒.n))`Yes, it's used in this line. However, this doesn't actually have any effect whatsoever on the execution of this. So I ignore it. It was merely a distraction.> `with Mаtrix(ℤ(ℤ(4))):`It is used again to swallow exceptions. After this is just some fluff again.> `def strassen(m, x= 3.1415935258989):`This is an interesting part. Despite being called `strassen`, it does not actually implement the Strassen algorithm, which is a somewhat more efficient way to multiply matrices than the naive way used in - as far as I can tell - every entry.> `e = 2 ** (math.ceil(math.log2(m.n)) - 1)`This gets the next power of two in a fairly obvious way. It is used to pad out the matrix to the next power of 2 size.> `with m:`The context manager is used again for nicer lookups.> `Result[0] += [_(0j, iｎt(e, e))]`Weird pythonoquirkiness again. You can append to lists in tuples with `+=`, but it throws an exception as they're sort of immutable.> `typing(lookup[4])(input())`It's entirely possible that this does things.
gollark: > `def __eq__(self, xy): return self.bigData[math.floor(xy.real * self.n + xy.imag)]`This actually gets indices into the matrix. I named it badly for accursedness. It uses complex number coordinates.> `def __matmul__(self, ǫ):`*This* function gets a 2D "slice" of the matrix between the specified coordinates. > `for (fοr, k), (b, р), (whіle, namedtuple) in itertools.product(I(*iｎt.ℝ(start, end)), enumerate(range(ℤ(start.imag), math.floor(end.imag))), (ǫ, ǫ)):`This is really just bizarre obfuscation for the basic "go through every X/Y in the slice" thing.> `out[b * 1j + fοr] = 0`In case the matrix is too big, just pad it with zeros.> `except ZeroDivisionError:`In case of zero divisions, which cannot actually *happen*, we replace 0 with 1 except this doesn't actually work.> `import hashlib`As ever, we need hashlib.> `memmove(id(0), id(1), 27)`It *particularly* doesn't work because we never imported this name.> `def __setitem__(octonion, self, v):`This sets either slices or single items of the matrix. I would have made it use a cool™️ operator, but this has three parameters, unlike the other ones. It's possible that I could have created a temporary "thing setting handle" or something like that and used two operators, but I didn't.> `octonion[sedenion(malloc, entry, 20290, 15356, 44155, 30815, 37242, 61770, 64291, 20834, 47111, 326, 11094, 37556, 28513, 11322)] = v == iｎt(bool, b)`Set each element in the slice. The sharp-eyed may wonder where `sedenion` comes from.> `"""`> `for testing`> `def __repr__(m):`This was genuinely for testing, although the implementation here was more advanced.> `def __enter__(The_Matrix: 2):`This allows use of `Matrix` objects as context managers.> `globals()[f"""_"""] = lambda h, Ĥ: The_Matrix@(h,Ĥ)`This puts the matrix slicing thing into a convenient function accessible globally (as long as the context manager is running). This is used a bit below.
References
External links
- Frank Paul Geraci Jr. at the Biographical Directory of Federal Judges, a public domain publication of the Federal Judicial Center.
- Frank P. Geraci, Jr. at Ballotpedia
| Legal offices | ||
|---|---|---|
| Preceded by David G. Larimer |
Judge of the United States District Court for the Western District of New York 2013–present |
Incumbent |
| Preceded by William M. Skretny |
Chief Judge of the United States District Court for the Western District of New York 2015–present | |
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.