Ford Taunus P3

The Ford Taunus 17 M is a middle sized family saloon/sedan that was produced by Ford Germany between September 1960 and August 1964.[2] The Taunus 17M name had been applied to the car's predecessor and it would apply also to subsequent Ford models which is why the 17M introduced in 1960 is usually identified, in retrospect, as the Ford Taunus P3. It was the third newly designed German Ford to be launched after the war and for this reason it was from inception known within the company as Ford Project 3 (P3) or the Ford Taunus P3.

Ford Taunus 17M
Overview
ManufacturerFord Germany
Also calledFord Taunus P3
"Badewannetaunus " (Bath-tub Taunus)
ProductionSeptember 1960 – August 1964
AssemblyCologne-Niehl, Germany
Body and chassis
ClassExecutive car (E)
Body style2-door or 4 saloon
3-door "Kombi" estate car
2-door coach-built (Karl Deutsch) cabriolet[1]
Powertrain
Engine1498 cc 4-cylinder in-line water-cooled
1698 cc 4-cylinder in-line water-cooled
1758 cc 4-cylinder in-line water-cooled
Transmission3- or 4-speed manual
Saxomat automatic clutch optional with 3-speed box
Dimensions
Wheelbase2,630 mm (103.5 in)
Length4,452 mm (175.3 in)
4,517 mm (177.8 in) (turnier/estate)
Width1,670 mm (65.7 in)
Height1,450 mm (57.1 in) or 1,490 mm (58.7 in)
Curb weight940–1,015 kg (2,072–2,238 lb)
Chronology
PredecessorFord Taunus 17M P2
SuccessorFord Taunus 17M P5
The coachbuilt cabriolet, converted by Karl Deutsch of Cologne was always rare.
The three door station-wagon/estate was badged as the Ford Taunus 17M Turnier.
The instrument panel ahead of the driver and the radio both carried over the shape of an extended lozenge which dominated the shape of the car when viewed from outside.

Members of the press had apparently competed to find a suitably disrespectful epithet to describe the controversially styled first Taunus 17M, and it was in the same tradition that the new 17M for 1960 became known as the "Badewannetaunus" (Bath tub Taunus).

The Ford Taunus P3 was a commercial success. 669,731 were produced during a four-year production run, giving an annualised rate more than twice that achieved by the predecessor model during its three years in production.

High profile launch

The car received its public launch at the Beethoven Hall in Bonn. Unusually for a car launch, both the by now 84-year-old German chancellor, Konrad Adenauer, and the grandson of the firm's founder, Henry Ford, were present. In addition to the latest Ford Taunus, they were celebrating the thirtieth anniversary of Ford's Cologne plant. It had been on 2 October 1930 that Henry Ford and the then mayor of nearby Cologne, Konrad Adenauer, had laid the foundation stone for the Cologne Ford Plant.[3][4]

European design

The first post-war Taunus models had been designed in North America. The Taunus P3 was designed by Uwe Bahnsen, a German born designer who would dominate car design at Ford of Germany for nearly thirty years and whose subsequent designs included the 1969 Ford Capri and its successors. Towards the end of his time in charge of design with Ford of Germany, Bahnsen also led the teams that designed the Fords Sierra and Scorpio. In the context of 1960 the Taunus P3 can nevertheless be seen as Bahnsen's most innovative design for a production car.

The 1960 Taunus design featured a recurring geometrical shape, which was a cross between a short sausage and a long lozenge. The rear panel and the side panels respected the same basic shape as did the front grill, subject to two large cut-outs for the headlights.

The same shape was carried over to the interior of the car where the main dials and controls on the dash-board were surrounded by a thick frame in the shape that respected a short sausage (or a very long lozenge). The repetitious use of a single simple shape at different levels of the design gave the overall car a consistent visual unity which was in stark contrast to the high finned flamboyance of the previous Taunus 17M and was seen at the time as a radical switch by Ford of Germany away from American styling in favour of European styling.[1] There were no tails fins and there was very little decorative chrome included. The efficiency of its superficially much more simple design enabled Ford to boast that the 1960 car, despite being fractionally narrowed on the outside, offered usefully more interior width than the car it replaced.

Despite the importance of sausages in German cuisine, the award for a catchy soubriquet was earned by the person who saw the car and was reminded not of a sausage but of a bathtub. It was and remains the "Badewanne" (bathtub) soubriquet that caught the eye of the press reporters, and it is as the "Badewannetaunus" that the car continues to be remembered by enthusiasts

Technical Innovation

The P3 and the 1961 Citroën Ami were the first cars with rectangular or lozenge-shaped (non-round) headlights.[5] This technical innovation was developed by lighting manufacturers Hella (Taunus) and Cibie (Ami). At the time, it was an unquestioned article of faith that headlights were round, and in the United States, it was the law, so these new headlights were illegal there. Ten years later this had inspired European automakers to come up with various non-round headlamp shapes, though many had by 1970 settled on a standardised shared rectangular shape.

Body

Most of the cars were sold as two- or four-door sedans/saloons. A three-door "Turnier" station wagon was also available. The confident determination of the car's designers’ to celebrate the new decade with something new and different was reflected in the unusual positioning of the rear lights on the early station wagons, on the leading edge at the back of the roof of the car, as two red horizontal units lined up directly above the tailgate. Later P3 Turniers had their rear lights more conventionally positioned.

The P3 also followed the tradition of its predecessor in that coach built two-door cabriolets and coupes were offered, converted by a traditional Cologne based body builder called Karl Deutsch[1] However, these special bodied cars appear to have been relatively expensive, and only about 150 were produced.

The cars were offered with an unusually broad choice of color and interior trim options.

The early 1960s were a period of rapid expansion for the west European auto-industry, and export markets for the new 17M included Greece and Australia where several cars were converted locally into "pickups" or, in Australian English, "utes". The 17M was also assembled in South Africa and Southern Rhodesia in right hand drive.[6]

Engine and running gear

The cars were all branded as Ford Taunus 17Ms which might have led observers who thought they had understood Ford Germany's naming conventions to conclude that the cars all came with 1.7 litre engines. In fact, there were three different engine sizes offered, being the 1498 cc unit first seen in the Taunus 15M of 1954, the 1698 cc unit originally introduced in 1957 to cope with the weight of the first Ford Taunus 17M and, from September 1961, a new larger 1757 cc engine.[2] Power outputs initially ranged from 55 PS (40 kW; 54 hp) to 60 PS (44 kW; 59 hp), and these engine versions remained available throughout the model's four-year life, but several more powerful engines featuring raised compression ratios in response to the increased availability of higher octane fuels appeared during the four-year period: by 1964 the most powerful Ford 17M offered 75 PS (55 kW; 74 hp). In Sweden, the more powerful version first available in 1962 was sold as the "Taunus Sport", with the inclusion of a more lavish interior.[7] Approximately 50% of the cars built were delivered with the smallest of the three engines, the 1498 cc unit.[2]

The engines were all gasoline/petrol powered four-cylinder inline four-stroke water-cooled units.

Changing gear involved a column-mounted gear change, which by now was becoming increasingly mainstream in Germany. It was possible to specify a "Saxomat" automatic clutch with the three-speed transmission,: drivers content to accept a fully manual gear change system could also specify a four-speed gear box.

There were several important technical innovations during the four-year model run which no doubt go some way to explain the car's commercial success when compared to that achieved by its predecessor, and will have strengthened the Ford image in a market which had grown used to seeing Ford sales trailing those of General MotorsOpel business. In April 1962 the 17M became the first mainstream production car in Germany to offer, as an option, disc brakes on the front wheels. Just over a year later front disc brakes became a standard fitting on all models. 1962 was also the year when the car acquired an "automatic starter" which reportedly made the traditional manual choke unnecessary.

Optional extras

Options available at extra cost included velour carpeting, grab handles for the passengers in the back, whitewall tires, a two tone paint finish and even a "make-up mirror" cleverly incorporated into the sun-visor on the passenger's side.[8]

Advertising

The 1960s was a period of rapid expansion in Europe both for the auto-industry and in the world of advertising. Ford tended to be ahead of the field in this aspect of marketing, even if some of the resulting slogans appear stilted fifty years later. The style of new Taunus 17M was advertised as representing a „Linie der Vernunft" which loosely translates as a "rational form" offering an implicit rebuke to the by now unfashionably elaborate styling of the old Taunus 17M. The car was advertised with the balanced and pithy slogan "Zum Fahren geboren. Zum sparen gebaut" (Born to drive. Built to save/economise).

Ford Taunus 17M (P3) production (units):[9]
  • 1960 29,944
  • 1961 168,430
  • 1962 193,378
  • 1963 164,646
  • 1964 97,658

Most of the cars produced were sedans/saloons, but the total of 669,731 also included 86,010 estate/kombi (Taunus 17M Turnier) bodied cars and (evidently not included in these data) approximately 15,000 other vehicles including pick-up truck conversions for customers in Greece and South Africa along with cabriolets and coupés, converted from sedans/saloons by the Cologne based coach-builder Karl Deutsch.[2]

Steel bodied station wagon equivalent models based on mainstream sedans were rapidly gaining in popularity. Giving the Taunus 17M station wagon a special name, "Turnier", intended to be unique to the Ford brand also showed the Ford marketing department ahead of the German owned competition. The Opel Rekord station wagon had already been dubbed by Opel a "CarAVan" in 1958, but market leaders Volkswagen would not find their equivalent label until the launch of the Volkswagen 1500 Variant in 1962.

Commercial

The boldly styled and regularly upgraded Taunus P3 was a commercial success. 669,731 were produced. The figure includes 86,010 station wagons. In the sales statistics for several months of 1961/62 the success of the model even enabled Ford briefly to overtake Opel on the German market, becoming the second best selling auto-brand, beaten to the top spot only by Volkswagen.

The Taunus P3 was replaced by the Ford Taunus P5 which would come with a wider range of engines and which would sell at approximately the same rate. However, the overall market size was growing through the 1960s, and with it grew the sales of the Opel Rekord. After the Taunus P3 no future Taunus model would come close to challenging Opel’s dominance of the large lucrative middle-market portion of the German auto-market.

Fifty years on

The Taunus P3 continues to generate enthusiasm, and most of the surviving vehicles in Germany enjoy the financial privileges and responsibilities available, in Germany, to owners of cars designated and maintained as oldtimers (the term used in Germany for a classic car).

In 2006 484 Taunus P3 sedans/saloons were registered in Germany along with 21 "Turnier" station wagons. There were thought to be fewer than 10 in the USA, a relatively high content of registered and/or roadworthy vehicles in the Scandinavian countries and a handful still survive in other countries (for instance some of the countries in Eastern Europe and Latin America where it was marketed) where statistics are less readily accessible than in Germany.

gollark: I did find one bug in Computercraft but that's basically irrelevant to everyone.
gollark: No, because I haven't really found any, and don't go looking much.
gollark: I mean, assuming the project has procedures for it.
gollark: There is literally no reason you cannot just responsibly report any exploits you find.
gollark: It's entirely possible?

References

Tuchen, Bernd: Ford Taunus 17M P3 - Die Geschichte der legendären "Badewanne", Verlag Dr. Faustus (2007), ISBN 978-3-933474-45-2

  • Oswald, Werner (2003). Deutsche Autos 1945-1990, Band (vol) 3 (in German). Motorbuch Verlag. ISBN 3-613-02116-1.
  1. "Oldtimer Katalog". Nr. 23. Königswinter: HEEL Verlag GmbH. 2009: Seite 150. ISBN 978-3-86852-067-5. Cite journal requires |journal= (help)
  2. Oswald 1945 - 90 (vol 3), p 371
  3. Jürgen Pander (6 October 2010). "Ford Taunus 17M: Willkommen in der Wunderwanne! "Sieht aus wie 'ne Badewanne", "ach, der Niehler Nacktarsch": Als Ford vor 50 Jahren den Taunus 17M rollen ließ, hagelte es Spott. Doch dann avancierte das schnörkellose Modell zum Verkaufsschlager. SPIEGEL ONLINE war mit dem Oldie unterwegs - und zeigt, was die Autofahrer damals begeisterte. "In der Beethovenhalle in Bonn wurde der Wagen im Herbst des Jahres 1960 der Öffentlichkeit vorgestellt. Zu diesem Ereignis, das mit der 30-Jahr-Feier von Ford in Köln zusammenfiel, war Henry Ford II., der Enkel des Firmengründers, an den Rhein gekommen. Zu einem Empfang bei Bundeskanzler Konrad Adenauer fuhr Ford im neuen 17M vor, und der ansonsten Autos eher desinteressiert gegenüber stehende Regierungschef soll die Form derart ansprechend gefunden haben, dass er prompt zum Probesitzen einstieg. Anderntags hing in einer Bonner Buchhandlung ein Foto der Szene mit dem kecken Text "Ford mit Adenauer..."". SPIEGEL-ONLINE. Retrieved 16 May 2013.
  4. Rudolf Augstein (proprietor and former managing editor), Hans Detlev Becker (managing editor) (12 October 1960). "Ford Taunus 17M: Willkommen in der Wunderwanne! "Spiel mit Geheimnissen", "Konrad Adenauer war erst 54 und noch Oberbürgermeister von Köln, als er mit dem Begründer des amerikanischen Automobil-Imperiums Ford, Henry I., den Grundstein zum deutschen Ford-Werk in Köln-Niehl legte. Zur 30. Wiederkehr des Ereignisses in dieser Woche begegnet Adenauer, nunmehr 84, dem mittlerweile zum Firmenchef avancierten Ford-Enkel Henry II.....Das Jubiläumstreffen von Kanzler und Konzern-Majestät ist indes nur einer der Reklame-Coups, den die Ford-Werber für die Festivität eingeplant haben.."". SPIEGEL-ONLINE. p. 81. Retrieved 16 May 2013.
  5. http://www.motortrend.com/classic/features/1011_citroen_ami_6/
  6. 1961 Ford Motor Company (Rhodesia)
  7. Björklund, Bengt, ed. (March 1962). "Branschen i blickpunkten" [Focus on the industry]. Illustrerad Motor Sport (in Swedish). No. 3. Lerum, Sweden. p. 34.
  8. Jürgen Pander (6 October 2010). "Ford Taunus 17M: Willkommen in der Wunderwanne! " Im Angebot waren unter anderem Veloursteppich, Haltegriffe im Fond, Tageskilometerzähler, Weißwandreifen, Zweifarblackierung oder ein Make-up-Spiegel an der Sonnenblende über dem Beifahrersitz...."". SPIEGEL-ONLINE. Retrieved 16 May 2013.
  9. Oswald 1945 - 90 (vol 3), p 357 & 369
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.