FS Class 103

FS Class 103 was a class of 2-2-2 steam locomotives of the Italian State Railways (FS), originally built for the Strade Ferrate dello Stato Piemontese (SFSP).

SFSP 34–38 and 80–89 SFAI 91–110 RM 519–538 FS 103
Locomotive SFAI 109
Type and origin Power type Steam Builder Sharp, Stewart and Company Serial number 724–728, 832–836, 848–852, 1514–1518 Build date 1853-1855, 1864 Total produced 20
Specifications Configuration: ​  • Whyte 2-2-2  • UIC 1A1 n2 Gauge 1,435 mm (4 ft 8 ^1⁄2 in) Driver dia. 1.981 m (6 ft 6 in) Length 14.211 m (46 ft 7 ^1⁄2 in) (tender included) Adhesive weight 12.5 tonnes (12.3 long tons; 13.8 short tons) Loco weight 27.4 tonnes (27.0 long tons; 30.2 short tons) Fuel type Coal Boiler pressure 7 bar (700 kPa; 102 psi) Cylinders Two, inside Cylinder size 406 mm × 508 mm (16 in × 20 in) Valve gear Stephenson
Performance figures Maximum speed 80 km/h (50 mph) Power output 220 kW (300 hp)

History

Fifteen locomotives were built in Britain between 1853 and 1855 by Sharp, Stewart and Company and were numbered 34 to 38 and 80 to 89 by the SFSP, which used them for the haulage of fast trains. In 1865 they passed to Società per le strade ferrate dell'Alta Italia (SFAI) which numbered them from 91 to 105. In 1864, SFAI purchased another five units and numbered them 106 to 110. In 1885 they were taken over by Rete Mediterranea (RM) where they were numbered 519 to 538. In 1905, only 5 units survived to be taken over by Ferrovie dello Stato (FS), which registered them as Class 103 with numbers from 1031 to 1035. Since these were obsolete machines, they were all scrapped by 1910.[1]

Technical details

The driving wheels had a diameter of just under 2 metres and this allowed them to reach 80 km/h. The design of the engines was typically British with outside frames and inside cylinders. The tender carried 7 tons of water and 3 tons of coal. They developed 300 horsepower.

References

1. "FS 103". pospichal.net. Retrieved 2 March 2018.