Driehuis railway station

Driehuis railway station is located in Driehuis, the Netherlands. The station opened on 29 September 1957 on the Haarlem–Uitgeest railway. The station has 2 platforms.

Driehuis
LocationNetherlands
Coordinates52°26′34″N 4°38′21″E
Line(s)Haarlem–Uitgeest railway
History
Opened29 September 1957
Services
Preceding station   Nederlandse Spoorwegen   Following station
toward Hoorn
NS Sprinter 4800
toward Amsterdam Centraal
Location
Driehuis
Location within Northern Randstad
Driehuis
Driehuis (Netherlands)

Train services

As of 9 December 2018, the following services call at Driehuis:

National rail

Train Operator(s) From Via To Freq. Service
Sprinter

4800

NS Amsterdam Centraal Amsterdam Sloterdijk - Halfweg-Zwanenburg - Haarlem Spaanwoude - Haarlem - Bloemendaal - Santpoort Zuid - Santpoort Noord - Driehuis - Beverwijk - Heemskerk - Uitgeest - Castricum - Heiloo - Alkmaar - Alkmaar Noord - Heerhugowaard - Obdam Hoorn 2/hour Runs only 1x per hour between Alkmaar and Hoorn after 8.00 pm

Bus services

The nearest busstation to Driehuis railway station is Driehuis v.d. Vondellaan.

Operator Line Route Service
Connexxion 3 Haarlem Schalkwijk - Haarlem NS - Haarlem Delftplein - Velserbroek - Driehuis v.d. Vondellaan - IJmuiden
N30 IJmuiden Dennekoplaan - Driehuis v.d. Vondellaan - Santpoort-Noord - Haarlem Delftplein - Haarlem NS - Haarlem Schalkwijk - Vijfhuizen - Hoofddorp NS - De Hoek - Schiphol Airport - Schiphol-Noord - Amstelveen - Ouderkerk a/d Amstel - Amsterdam Bijlmer ArenA Nightbusses under the brand R-Net
N80 Amsterdam Leidseplein → Halfweg-Zwanenburg NS → Haarlem Spaarnwoude NS → Haarlem NS → Velserbroek → Driehuis v.d. Vondellaan → IJmuiden Dennekoplaan
gollark: They're not very useful, and also not a great beginner project, since making a particularly complex or remotely practical one is *hard* and requires relatively deep knowledge.
gollark: https://gist.github.com/SquidDev/6fa444798bbe01f4068bf82a76ac273f
gollark: Look, OSes just generally aren't useful.
gollark: But frankly I'm not sure what the point of it is in the first place.
gollark: I would write it like this:```lualocal function wrap_peripheral(find, name) if find then return peripheral.find(name) else return peripheral.wrap(name) endend```


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.