Flat (music)

In music, flat (Italian bemolle for "soft B") means "lower in pitch". Flat is the opposite of sharp, which is a raising of pitch. In musical notation, flat means "lower in pitch by one semitone (half step)", notated using the symbol ♭ which is derived from a stylised lowercase 'b'.[1][2] For instance, the music below has a key signature with three flats (indicating either E♭ major or C minor) and the note, D♭, has a flat accidental.

The Unicode character ♭ (U+266D) can be found in the block Miscellaneous Symbols; its HTML entity is ♭.

Under twelve-tone equal temperament, D♭ for instance is enharmonically equivalent to C♯, and G♭ is equivalent to F♯. In any other tuning system, such enharmonic equivalences in general do not exist. To allow extended just intonation, composer Ben Johnston uses a sharp as an accidental to indicate a note is raised 70.6 cents (ratio 25:24), and a flat to indicate a note is lowered 70.6 cents.[3]

In intonation, flat can also mean "slightly lower in pitch" (by some unspecified amount). If two simultaneous notes are slightly out-of-tune, the lower-pitched one (assuming the higher one is properly pitched) is "flat" with respect to the other. Furthermore, the verb flatten means to lower the pitch of a note, typically by a small musical interval.

Key signatures

Flats are used in the key signatures of

  1. F major / D minor (B♭)
  2. B♭ major / G minor (adds E♭)
  3. E♭ major / C minor (adds A♭)
  4. A♭ major / F minor (adds D♭)
  5. D♭ major / B♭ minor (adds G♭)
  6. G♭ major / E♭ minor (adds C♭)
  7. C♭ major / A♭ minor (adds F♭)

The order of flats in the key signatures of music notation, following the circle of fifths, is B♭, E♭, A♭, D♭, G♭, C♭ and F♭ (mnemonics for which include Battle Ends And Down Goes Charles' Father and Before Eating A Doughnut Get Coffee First).

Double flats also exist, which look like (similar to two flats, ♭♭) and lower a note by two semitones, or a whole step. The Unicode character 𝄫 (U+1D12B) in the Musical Symbols block represents the double-flat sign. Historically, in order to raise a double flat to a simple flat, it was required to use the notation ♮♭. In modern scores it is acceptable to simply denote this with a single flat ♭.

A quarter-tone flat or half flat, indicating the use of quarter tones, may be marked with various symbols including a flat with a slash () or a reversed flat sign (). A three-quarter-tone flat, flat and a half or sesquiflat, is represented by a half flat and a regular flat ().

Although very uncommon, a triple flat () can sometimes be found.[4] It lowers a note three semitones.

gollark: Smoke detectors do actually use small radiation sources to, er, detect smoke, actually.
gollark: It's a shame we're so averse to nuclear stuff, or my watch could go from "battery replacement needed every 7 years" to "*nuclear* battery replacement every 100 years".
gollark: Not yet, not yet...]
gollark: It seemed like such an innocent idea - embedding small radioisotope generators in SSDs so if the power fails they can continue writing from their buffers, or run routine maintenance tasks. But little did they know that some SSDs would explode when they hit end-of-life...
gollark: Randomly exploding *nuclear-powered* SSDs.

See also

References
  1. Benward & Saker (2003). Music in Theory and Practice, Vol. 1, p. 6. McGraw-Hill, Seventh edition. "Flat (♭)—lowers the pitch a half step."
  2. Flat, Glossary, Naxos Records
  3. John Fonville. "Ben Johnston's Extended Just Intonation- A Guide for Interpreters", p. 109, Perspectives of New Music, Vol. 29, No. 2 (Summer, 1991), pp. 106–137. "...the 25/24 ratio is the sharp (♯) ratio ... this raises a note approximately 70.6 cents."
  4. Byrd, Donald (September 2016). "Extremes of Conventional Music Notation". Indiana University Bloomington. Retrieved 4 November 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.