Dortmund Data Bank

The Dortmund Data Bank[1] (short DDB) is a factual data bank for thermodynamic and thermophysical data. Its main usage is the data supply for process simulation where experimental data are the basis for the design, analysis, synthesis, and optimization of chemical processes. The DDB is used for fitting parameters for thermodynamic models like NRTL or UNIQUAC and for many different equations describing pure component properties, e.g., the Antoine equation for vapor pressures. The DDB is also used for the development and revision of predictive methods like UNIFAC and PSRK.

Dortmund Data Bank
TypeData Bank
Time complexity in big O notation
Algorithm Average Worst case

Contents

Mixture properties
Double Azeotrope of Benzene and Hexafluorobenzene, taken from Dortmund Data Bank

The mixture data banks contain currently (April 2007) approx. 308,000 data sets with 2,157,000 data points for 10750 components building 84870 different binary, ternary, and higher systems/combinations.

Pure component properties
Vapor pressure diagrams of Water

The pure component properties data bank contains currently (April 2007) approx. 157,000 data sets with 1,080,000 data points for 16700 different components.

Data sources

The DDB is a collection of experimental data published by the original authors. All data are referenced and a quite large literature data bank is part of the DDB, currently containing more than 92,000 articles, books, private communications, deposited documents from Russia (VINITI), the Ukraine (Ukrniiti) and other former USSR states, company reports (mainly from former GDR companies), theses, patents, and conference contributions.

Secondary sources like data collections are normally neglected and only used as a literature source. Derived data are also not collected with the main exception of the azeotropic data bank which is built partly from evaluated vapor–liquid equilibrium data.

History

The Dortmund Data Bank was founded in the 1970s at the University of Dortmund in Germany. The original reason for starting a vapor–liquid phase equilibria data collection was the development[2] of the group contribution method UNIFAC which allows to estimate vapor pressures of mixtures.

The DDB has since been extended to many other properties and has increased dramatically in size also because of intensive (German) government aid. The funding has ended and the further development and maintenance is performed by DDBST GmbH, a company founded by members of the industrial chemistry chair of the Carl von Ossietzky University of Oldenburg, Germany.

Additional contributors are the DECHEMA, the FIZ CHEMIE (Berlin), the Technical University in Tallinn, and others.

Availability

The Dortmund Data Bank is distributed by DDBST GmbH as in-house software. Many parts of the Dortmund Data Bank are also distributed as part of the DETHERM data bank which is also available online.

gollark: I'm mostly in low earth orbit these days.
gollark: None are safe, except those in space.
gollark: Initiating apiogeolocatoforms.
gollark: 25? Weak. We have 43k or so.
gollark: Like the Communism Protocols and Apioprotocols of osmarks.tk™ apiaristics, obviously.

See also

References
  1. Onken U., Rarey-Nies J., Gmehling J., "The Dortmund Data Bank: A Computerized System for Retrieval, Correlation, and Prediction of Thermodynamic Properties of Mixtures", Int.J.Thermophys., 10(3), 739-747, 1989
  2. Gmehling J., Weidlich U., "Die Dortmunder Datenbank. Basis für die Weiterentwicklung der UNIFAC-Methode", Chem.Ing.Tech., 57(5), 447-449, 1985
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.