Digital dentistry

Digital dentistry refers to the use of dental technologies or devices that incorporates digital or computer-controlled components to carry out dental procedures rather than using mechanical or electrical tools. The use of digital dentistry can make carrying out dental procedures more efficient than using mechanical tools, both for restorative as diagnostic purposes. Used as a way to facilitate dental treatments and propose new ways to meet rising patient demands.

'Godfather' of Digital Dentistry is the French professor François Duret, who invented dental CAD/CAM in 1973.

Digital Dentistry technologies

Some of the technologies used in digital dentistry include:

  • Intra-oral Cameras
  • CAD/CAM
    • Computer-aided implant dentistry — including design and fabrication of surgical guides
    • Computer-aided crown manufacturing
  • 3D Printing (e.g. to print physical models of digital images taken with intra-oral scans, make appliances, temporaries, surgical guides)[1]
  • Digital radiography
  • Electric and surgical/implant handpieces
  • Computer-aided implant dentistry
  • Photography (extraoral and intraoral)
  • Practice and patient record management software — including digital patient education
  • Shade matching
  • Diagnodent
  • Dental lasers
  • The Wand- used to carry anesthesia[2][3]
  • Digital X-Rays (includes both direct sensors and indirect phosphor plate systems)
  • Dental Loupes
  • Virtual and Augmented Reality

Intra-oral cameras

X-rays have been extremely valuable for many years in assessments of oral health. However, at times the image produced can show limited information because it is only a 2D image. Intra-oral cameras (IOCs) allow an operator to see a clear image of the inside of the mouth. Similar to the size of a dental mirror IOCs have a tiny camera that is able to detect more on the 3D surface of a tooth than a 2D x-ray image is able to show. Examples include specific locations and sizes of cavities, cracked teeth, excessive erosion, abrasion and many more.

Conventional dental impressions are made by placing an impression material loaded on an impression tray over the dental arches. As it sets a negative imprint of the soft and hard tissues in the mouth. Digital intra-oral impressions made using intra-oral cameras are able to recreate the positive impression of a patient's dentition and other structures into a digital format on a computer almost instantly.

Enhancements

Colour Matching

Traditionally dentists will use a physical shade guide in the dental surgery as they compare the patient's teeth to the shades in the guide, all done while the patient is in the chair. Newer computer matching techniques allow for a more superior than matching methods currently used.[4] There is always differences in perception when it comes to the human eye and observation. This was proved in a study which found that there was a high statistical correlation between a spectrophotometer and the digital camera used.[4] Now used in some dental surgeries it can improve dental-laboratory communication.

CAD/CAM in dentistry

CAD/CAM used with intra-oral scanning

Two studies investigated the accuracy of both direct an indirect digitized impressions used to make clinically acceptable zirconia crowns. It was shown that a significantly smaller marginal fit was observed when compared to traditional methods of casting, a more accurate marginal and internal fit.[5][6] The efficiency and fit of fully ceramic restorations fabricated through CAD/CAM were evaluated through a double-blinded randomized clinical trial. Direct digitized impressions were taken straight from the patients mouths and indirect digitized impression taken from already made impressions.[6] The digitized impressions were then used to create CAD/CAM milled all-ceramic crowns.[5] Between the direct and indirect, the direct digital impression technique was statistically more accurate, they showed significantly better inter-proximal contact.[6] The entire process proved to be more time efficient for both the dentist and patient in comparison with conventional methods or taking impressions with silicone impressions and sending them to a lab.

Use of dental technology in other areas of dentistry

Within the dental profession there are already uses for digital dentistry and as technology continues to develop, proposed uses for the futures. Some examples are outlined below;

Diagnosis of caries

Caries disease process results in structural changes to the dental hard tissue. The diffusion of ions out of the tooth, known as the demineralisation process, will result in loss of mineral content. The resulting region will be filled mainly by bacteria and water. This region will have greater porosity than the surrounding tissue, which results in a distinct change in the optical properties of the affected dental tissue, providing evidence of caries-induced change. Optically based methods detect caries on changes in the specific optical properties. Quantitative light-induced fluorescence – Changes in enamel fluorescence can be detected and measured when the tooth is illuminated by violet-blue light from a camera hand piece. The image is saved and processed. The end product is an image which gives a measure of the extent and severity of the lesion. [7]

Occlusion and TMJ analysis

Virtual and Augmented Reality

Virtual Reality (VR) is a computer-generated simulation which allows for interactive experience, it fully recreates the environment for which the simulation that is ran. Augmented Reality (AR) may be considered a form of virtual reality and is a way of interacting with the real world through a simulation. The objects and individuals are augmented due to them being computer-generated, but are perceived in the real world through a camera onto a screen.

Simulations produced by augmented reality can take on the reason for training activities by using technologically-synthesised features which are able to mimic real life situations.[8] These can be used throughout the career timeline of a profession, from undergraduate students, specialised and training days. VR and AR systems are becoming more common in dental education. They will continue to change clinical training and encourage more receptive ways of processing individual learning needs and self-directed learning. Pedagogical tools such as these are said to lower the costs of the educational process while increasing the quality.

Limitations

Limitations on digital dentistry include cost, lack of desire to adapt to new dental technology, and misunderstanding of new technologies.[9]

The future

As digital dentistry continues to adapt and becomes more common, the approach to incorporating the topic of digital dentistry in learning outcomes during dental training must also change. As we enter 'the digital age of dental education', future practitioners need to be exposed to new digital procedures in the curriculum and teaching.[10] In an article titled "Digital Teaching and Digital Medicine: A national initiative is needed", it is suggested that faculties and ministries should be the ones to encourage integration of digital teaching into the education of future physicians and students and the learning of digital technologies which are up to date and relevant.[11]

gollark: You can rewrite it 5 times and it'll still be quicker than making it work in C.
gollark: But there's no talk of a Python 4 soon.
gollark: I have never actually had this problem aside from the 2/3 split.
gollark: Python is unlikely to change core features around ever and there's tons of warning if they deprecate functions.
gollark: This would be faster and segfault less in Python.

References
  1. Oberoi G, Nitsch S, Edelmayer M, Janjić K, Müller AS, Agis H (2018-11-22). "3D Printing-Encompassing the Facets of Dentistry". Frontiers in Bioengineering and Biotechnology. 6: 172. doi:10.3389/fbioe.2018.00172. PMC 6262086. PMID 30525032.
  2. Digital Dentistry - Digital Technologist in the Dental Office
  3. High-tech teeth: Dentistry is going digital
  4. Jarad FD, Russell MD, Moss BW (July 2005). "The use of digital imaging for colour matching and communication in restorative dentistry". British Dental Journal. 199 (1): 43–9, discussion 33. doi:10.1038/sj.bdj.4812559. PMID 16003426.
  5. Ahrberg D, Lauer HC, Ahrberg M, Weigl P (March 2016). "Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial". Clinical Oral Investigations. 20 (2): 291–300. doi:10.1007/s00784-015-1504-6. PMID 26070435.
  6. Syrek A, Reich G, Ranftl D, Klein C, Cerny B, Brodesser J (July 2010). "Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling". Journal of Dentistry. 38 (7): 553–9. doi:10.1016/j.jdent.2010.03.015. PMID 20381576.
  7. Karlsson L (2010). "Caries Detection Methods Based on Changes in Optical Properties between Healthy and Carious Tissue". International Journal of Dentistry. 2010: 270729. doi:10.1155/2010/270729. PMC 2864452. PMID 20454579.
  8. Wierinck E, Puttemans V, van Steenberghe D (February 2006). "Effect of tutorial input in addition to augmented feedback on manual dexterity training and its retention". European Journal of Dental Education. 10 (1): 24–31. doi:10.1111/j.1600-0579.2006.00392.x. PMID 16436081.
  9. Digital dentistry: Is this the future of dentistry?- Dental Economics
  10. Duke, Alice (Autumn 2016). "Entering the Digital Age of Dental Education". BDJ Student: 35, 36.
  11. Haag M, Igel C, Fischer MR (2018). "Digital Teaching and Digital Medicine: A national initiative is needed". GMS Journal for Medical Education. 35 (3): Doc43. doi:10.3205/zma001189. PMC 6120157. PMID 30186953.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.