Debarking (lumber)

Debarking is the process of removing bark from wood. Traditional debarking is conducted in order to create a fence post or fence stake which would then go on to be pointed before being planted.Lauda lelo mera[1] Debarking can occur naturally during powerful tornadoes.[2]

For the veterinary procedure performed on dogs and cats, see Devocalization.
Debarker machine
Manually decorticated trunk of a spruce as protection to bark beetles

Process

Debarking generally involves the use of industrial machinery into which the log or stake is placed.[3] These machines can be either stationary or portable. Generally they are powered by hydraulic motors but can also be driven by a power take-off. The log or stake is then pressed against blades or knives which remove the bark while the log is turned to ensure the removal of bark from all around the log. Debarking can also take place by hand, although this can be very time consuming and may not be suitable for large volumes.[4]

gollark: I may have some work to do.
gollark: +<markov 509849474647064576 10
gollark: ?tag not found
gollark: So, minor bug, it turns out that the rate limiting was very enthusiastic and [REDACTED] total control over certain unpatched network infrastructure.
gollark: Hey, I could plot event bus messages as a proportion of all traffic, that would be fun.

See also

References
  1. Debarkers. Energy Online Expo.
  2. Adams, Dave K. (2007). The structural engineer's professional training manual. McGraw-Hill Professional. p. 193. ISBN 978-0-07-148107-6. Retrieved 24 May 2011.
  3. Leavengood, Scott. "Western Juniper Debarking Project" (PDF). Oregon State University. Retrieved April 14, 2011.
  4. "Chapter 10 - Debarking". Wood Harvesting with Hand Tools - An Illustrated Training Manual. International Labor Organization. 1987. p. 128. ISBN 9221062171. OCLC 816745408.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.