DYSEAC
DYSEAC was the second Standards Electronic Automatic Computer. (See SEAC.)
| Manufacturer | National Bureau of Standards for the US Army Signal Corps |
|---|---|
| Generation | 1 |
| Release date | April 1954 |
| CPU | 900 vacuum tubes and 24,500 crystal diodes |
| Memory | 512 words of 45 bits each (plus one parity bit) (mercury delay line memory) |
| Mass | 20 short tons (18 t) |
| Predecessor | SEAC |
DYSEAC was a first-generation computer built by the National Bureau of Standards for the US Army Signal Corps. It was housed in a truck, making it one of the first movable computers (perhaps the first). It went into operation in April 1954.[1]
DYSEAC used 900 vacuum tubes and 24,500 crystal diodes. It had a memory of 512 words of 45 bits each (plus one parity bit), using mercury delay line memory. Memory access time was 48–384 microseconds. The addition time was 48 microseconds and the multiplication/division time was 2112 microseconds. These times are excluding the memory access time, which added up to approximately 1500 microseconds to those times.
DYSEAC weighed about 20 short tons (18 t).[2]
See also
References
- "9. Bureau of Standards Computers - DYSEAC". Digital Computer Newsletter. 6 (4): 7. October 1954.
- Weik, Martin H. (March 1961). "DYSEAC". ed-thelen.org. A Third Survey of Domestic Electronic Digital Computing Systems.
External links
- BRL report on computers, inc. DYSEAC
- Astin, A. V. (1955), Computer Development (SEAC and DYSEAC) at the National Bureau of Standards, Washington D.C., National Bureau of Standards Circular 551, Issued January 25, 1955, U.S. Government Printing Office. Fully viewable online. Includes several papers describing the technical details and operation of both DYSEAC and its predecessor SEAC, from which DYSEAC was derived. In particular, see "DYSEAC", by A. L. Leiner, S. N. Alexander, and R. P. Witt, on pp. 39–71, for an overview of DYSEAC and its differences from SEAC.