Cierva W.9

The Cierva W.9 was a British 1940s experimental helicopter with a three-blade tilting-hub controlled main rotor, and torque compensation achieved using a jet of air discharged from the rear port side of the fuselage.

W.9
Role Experimental helicopter
Manufacturer Cierva Autogiro Company, Ltd.
First flight 1945
Retired 1946
Primary user Air Ministry

Development

In 1943, primary investor G & J Weir Ltd. revived the moribund Cierva Autogiro Company to develop an experimental helicopter to Air Ministry Specification E.16/43. The W.9 was to investigate James G. Weir's contention that a powered tilting hub-controlled rotor with automatic collective pitch control, and torque reaction control using jet efflux, was both safer and more efficient than the Sikorsky R-4 helicopter fitted with manually controlled main rotor cyclic and collective pitch and the anti-torque tail rotor system. The W.9 was completed late in 1944 and assigned serial PX203. It was damaged during ground-running due to incorrect control phasing arising from a high order of pitch-flap coupling, and did not start test flying until 1945.

The most visible characteristic of the W.9 was torque compensation and directional control by using blown air rather than a tail rotor. A variable pitch fan cooled the engine; the heated air and engine exhaust passed through the long hollow tailboom and exhausted to port.[1] Foot pedals controlled the fan pitch. Of more importance, however, was the shaft-driven hydraulically-actuated rotor hub with rotational speed variation to give automatic collective pitch control.[2] Development of the rotor system resulted in a tilting hub combined with cyclic pitch control of each blade to minimize control forces. Manual control of collective pitch was added to the automatic collective pitch change system to provide precise vertical control in hover and the ability to cushion a landing from an autorotative descent.

The W.9 was first publicly demonstrated during an air display in Southampton on 22 June 1946.[3] It was displayed at the Seventh SBAC Airshow at Radlett in 1946[4]

The helicopter was destroyed in an accident in 1946 and the project was abandoned. Parts of the W.9 rotor hub were used in the W.14 Skeeter prototype.

Specifications (W.9)

Data from Flight [5]

General characteristics

  • Crew: two
  • Length: 37 ft (11 m)
  • Height: 10 ft (3.0 m)
  • Gross weight: 2,647 lb (1,201 kg)
  • Powerplant: 1 × de Havilland Gipsy Queen 31 6-cyl. air-cooled in-line piston engine, 205 hp (153 kW)
  • Main rotor diameter: 36 ft 0 in (10.97 m)
  • Main rotor area: 1,017 sq ft (94.5 m2)

Operators
 United Kingdom
gollark: If you wanted to ocnvert a number into a vector of digits, the right way would be repeated div/mod-ing.
gollark: Is that not the standard tool for reverse engineering?
gollark: However, why even.
gollark: - convert `n` to string- map over all chars, converting them to strings and then... parsing them as integers...? and crashing on error- collect the resulting ints together
gollark: It's simple*!

See also

References
  1. "Southampton Air Display", Flight: 639, 27 June 1946
  2. "The Helicopter", Flight: 50, 11 January 1951
  3. "New British helicopter". Meccano Magazine. Meccano Ltd. XXXI (8): 324. August 1946.
  4. "Seventh SBAC Display". Flight Global. 19 September 1946. p. 306. Retrieved 16 April 2016.
  5. "Cierva", Flight: 340, 17 April 1947

The Illustrated Encyclopedia of Aircraft (Part Work 1982-1985). Orbis Publishing.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.