Carl Georg Barth

Carl Georg Lange Barth (February 28, 1860 – October 28, 1939) was a Norwegian-American mathematician, mechanical and consulting engineer, and lecturer at Harvard University. Barth is known as one of the foreman of scientific management, who improved and popularized the industrial use of compound slide rules.

This article is about the mathematician and mechanical engineer. For the Norwegian painter, see Carl Wilhelm Bøckmann Barth. For the theologian, see Karl Barth.
Carl G. Barth, 1911.

Biography

Youth and education

Carl Georg Barth was born in Christiania, Norway. He was the fourth child of Jakob Boeckman Barth (1822-1892), a lawyer and Adelaide Magdeline Lange Barth (1828- 1897), daughter of a Danish clergyman. He received his early education in the public schools at Lillehammer.

He was a graduate from University at Christiania. He later attended the Royal Norwegian Navy technical school at Horten. In 1877, Barth started an apprenticeship in the navy yard at Karljohansvern in Horten.[1]

Career
One of Carl G. Barth's speed-and-feed slide rules

In 1899, efficiency expert Frederick W. Taylor hired Barth to work with him at Bethlehem Steel Company. Carl Barth helped to develop speed-and-feed-calculating slide rules.[2]

Carl G. Barth... discovered the law governing the tiring effect of heavy labor... such work consists of a heavy pull or a push on the man's arms... For example, when pig iron is being handled (each pig weighing 92 pounds), a first-class workman can only be under load 43 per cent. of the day... if the workman is handling a half-pig weighing 46 pounds, he can then be under load 58 per cent. of the day... As the weight grows lighter... a load is reached which he can carry in his hands all day long without being tired out. [3]

In 1902, Taylor and Barth went to work for William Sellers at the machine tool firm of William Sellers & Company of Philadelphia. An account of their application of slide rules was published in the Transactions of the American Society of Mechanical Engineers in 1904.[4][5]

Barth started in 1905 on his independent career as consulting engineer. Barth became an early consultant on scientific management and later taught at Harvard University. Barth edited articles submitted to International Correspondence School of Scranton, Pennsylvania publication, the Home Study Magazine. In 1909, he undertook the installation of scientific management in the Watertown Arsenal at Watertown, Massachusetts.[6]

Barth was a leftist and anticapitalist.[7]

Family

In March 1882, Barth was married to Henrike Jakobine Fredriksen. They were the parents of three children.

Selected publications
  • Barth, Carl G. "Report on Fixing of Rates for Loading Pig Iron by Half Pigs on Buggies in the Yards." South Bethlehem, Pa (1900): 82-84.
  • Carl Barth. Slide Rules for the Machine Shop as a Part of the Taylor System of Management. ASME, 1903.
  • Barth, C. G. "The Transmission of Power by Leather Belting." Transactions of the American Society of Mechanical Engineers 31 (1909).
  • Barth, Carl G. "Testimony of Carl G. Barth." Hearings of the US Commisions on Industrial Relations, 64th Congress, 1st. 1914.
  • Barth, Carl G. "Standardization of Machine Tools." Transactions, ASME Vol 38, 1916: 895-922.
  • Barth, Carl G. Labor turnover: A mathematical discussion. Carl G. Barth & Son, 1919.
  • Barth, C. G. "New Graphical Solution for Time Allowances in Task Setting." Management and Administration: 1943-44.
Patent
Charts
  • Barth, C. G. "Carl," Diagram of Functionalized Routing."." Chart 180.
gollark: +>markov
gollark: ++remind 7mo3w Apiarist.
gollark: +>markov
gollark: +>markov
gollark: +>markov

References
  1. Carl G. Barth, 1860–1939: A Sketch (Florence M. Manning. Norwegian-American Historical Association. Volume XIII: Page 114
  2. US Patent 753,840, 1904
  3. e.g. FW Taylor, The Principles of Scientific Management (1911) ch 2, 57
  4. Frederick Winslow Taylor, Class of 1883 (Stevens Institute of Technology) "Archived copy". Archived from the original on 2010-06-26. Retrieved 2009-11-05.CS1 maint: archived copy as title (link)
  5. An Interpretive Review of 20th US Machining and Grinding Research (M. Eugene Merchant. Cincinnati, Ohio: Techsolve, Inc. 2003) Archived 2009-02-05 at the Wayback Machine
  6. Taylorism at the Watertown Arsenal (Foundations and Trends in Technology)
  7. Drucker, P. F. (1993). The Rise of the Knowledge Society. The Wilson Quarterly (1976-), 17(2), 52–71. doi:10.2307/40258682

Further reading
  • Bjork, Kenneth Saga In Steel And Concrete – Norwegian Engineers In America (Northfield, Minnesota: Norwegian-American Historical Association, 1947)

Archives and records
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.