Call signs in Mexico

Call signs in Mexico are unique identifiers for telecommunications, radio communication, radio broadcasting and transmission. They are regulated internationally by the ITU as well as nationally by the Federal Telecommunications Institute, which regulates broadcast stations, wireless telecommunications and spectrum use.

The International Telecommunication Union has assigned Mexico the following call sign blocks for all radio communication, broadcasting or transmission:[1]

Call sign block
XAA–XIZ
4AA–4CZ
6DA–6JZ

While not directly related to call signs, the International Telecommunication Union (ITU) further has divided all countries assigned amateur radio prefixes into three regions; Mexico is located in ITU Region 2. Mexico is in ITU zone 10 and CQ zone 6.

Call sign assignments for amateur radio

The IFT issues call signs in the XE and XF series for amateur use, the latter mainly for offshore use. There are 60,000 licensed ham radio operators in Mexico.

The separating numeral is used to identify the region in which the amateur is licensed:[2]

Call sign prefix Region
XE1 Central Mexico Colima, Distrito Federal (Federal District, most of Mexico City), Guanajuato, Hidalgo, Jalisco, Mexico (the state surrounding the Distrito Federal on 3 sides, includes some parts of Mexico City), Michoacan, Morelos, Nayarit, Puebla, Querétaro, Tlaxcala, and Veracruz
XE2 Northern Mexico Aguascalientes, Baja California (northern half of the peninsula), Baja California Sur (southern half of the peninsula), Chihuahua, Coahuila, Durango, Nuevo León, San Luis Potosí, Sinaloa, Sonora, Tamaulipas, and Zacatecas
XE3 Southern Mexico Campeche, Chiapas, Guerrero, Oaxaca, Quintana Roo, Tabasco, and Yucatán
XF1 BC islands around the Baja California peninsula in the Pacific Ocean or the northern part of the Gulf of California
XF2 close central islands off the Pacific coast of the Mexican mainland, in the Gulf of Mexico, or in the southern Gulf of California, generally west of 90°W.
XF3 Caribbean islands Caribbean islands, generally east of 90°W.
XF4, XF0 Revillagigedo Revillagigedo island group, in the Pacific Ocean

Call signs for foreign hams

Typically a permit to operate in Mexico will state the call sign you are to use, and can be one's home call sign with a further XE prefix. For instance if your home call sign is WA1ZZZ, you might be assigned XE1/WA1ZZZ.

Further, if you operate outside of the XE1 area, you would add a further identifying suffix – for instance XE1/WA1ZZZ/XE2 if you were operating in northern Mexico.[3] The call sign must be given always as enumerated on the permit, and the operator's location must also be stated in Spanish.

The permit does not automatically allow operation in XF island areas. Special permission must be sought for island operation.

Special events

Call signs in the 6DA–6JZ block have been used for special event call signs on a temporary basis. In 2007, 6G1LM was assigned to Federación Mexicana de Radioexperimentadores for their 75th anniversary, as was 6F75A. Occasionally, other special call sign prefixes have been briefly allowed, such as XA5T, XB9Z, and XE0DX during major amateur radio contests. 4C1ASM was used by the Asociación de Scouts de Mexico (Mexican Scouts Association) during the Jamboree on the Air JOTA for some years.

6H1 also replaced the XE1 prefix, 6I2 replaced the XE2 prefix, and 6J3 replaced the XE3 prefix. 6E4 replaced XF4 for the Revillagigedo island group.[4]

gollark: Well, yes, I'd prefer if there were more channels available to prevent interception.
gollark: Besides, you would need a moderately large amount of ender chests to succeed.
gollark: It's entirely secure, as it's against the rules and thus impossible to steal from it, and it's cheaper.
gollark: Or some derivative.
gollark: You should* support EnderMail!

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.