Bustamite

Bustamite is a calcium manganese inosilicate (chain silicate) and a member of the wollastonite group. Magnesium, zinc and iron are common impurities substituting for manganese. Bustamite is the high-temperature polymorph of CaMnSi2O6 and johannsenite is the low temperature polymorph. The inversion takes place at 830 °C (1,530 °F), but may be very slow.[2]
Bustamite could be confused with light-colored rhodonite or pyroxmangite, but both these minerals are biaxial (+) whereas bustamite is biaxial (-).

Bustamite
Bustamite (pink) with galena (grey) from Broken Hill, New South Wales, Australia. Specimen size 3.7 cm.
General
CategoryInosilicate
Formula
(repeating unit)
CaMn2+Si2O6[1]
Strunz classification9.DG.05 (10 ed)
8/F.18.40 (8 ed)
Dana classification65.2.1.2
Crystal systemTriclinic
Crystal classPinacoidal 1
(same H-M symbol)
Space groupI1
Identification
ColorLight pink to brownish red Pink color fades on exposure to sunlight
Crystal habitUsually tabular or equant to prismatic; commonly massive, often compact and fibrous
TwinningRare. Simple twins with (110) as the composition plane
Cleavage{100} perfect; {110} and {110} good; {010} poor
Mohs scale hardness5.5 to 6.5
LusterVitreous
StreakWhite
DiaphaneityTranslucent to transparent
Specific gravity3.32 to 3.43 (observed) 3.40 (calculated)
Optical propertiesBiaxial (-), 2V=34° to 60°
Refractive indexnα = 1.640 - 1.695, nβ = 1.651 - 1.708, nγ = 1.653 - 1.710[2]
Birefringenceδ = 0.013 - 0.015
Dispersion r < v weak to strong
PleochroismWeak, X and Z orange, Y rose
SolubilityPartly soluble in HCl.[2]
Other characteristicslattice: A B1
Specimens from the Franklin Mine are fluorescent red in longwave ultraviolet light.[3] Not radioactive
References[4][5][6][7]

Cell parameters

There is considerable variety in the literature about the size and type of the unit cell, the formula to be used, and the value of Z, the number of formula units per unit cell.

Bustamite is a triclinic mineral, which could be described by a primitive unit cell, but the larger A-centered cell is often preferred, in order to facilitate comparison with the similar mineral wollastonite.[8]

The formula for bustamite is CaMn(SiO3)2[1] but it is sometimes written (Ca,Mn)SiO3, and changing the formula in this way will change the value of Z. The structure is chains of SiO4 tetrahedra with repeat unit of three tetrahedra, unlike the pyroxenes where the repeat unit is two.[9] Ca++ and Mn++ are positioned between the chains. There are 12 tetrahedra in the A-centered unit cell.[8]

The unit cell, the formula and Z cannot be taken separately; they are interlinked and form a consistent set of values. In this article we adopt the A-centred unit cell (space group A1) with a = 7.736 Å, b = 7.157 Å and c = 13.824 Å, the formula CaMn(SO3)2 and Z = 6. Deer et al.[2] take the formula as (Mn,Ca,Fe)[SiO3] so their value of Z is doubled to 12. Mindat[6] apparently gives the lattice parameters for a face-centred cell,[8] although they give the space group as P1.

Type locality

The type locality was originally taken as Tetela de Jonotla, Puebla, Mexico, and the mineral was named for the Mexican mineralogist and botanist Miguel Bustamante y Septiem (1790–1844)[10]. The material from Puebla, however, was later found to be a mixture of johannsenite and rhodonite,[9] so the type locality is now the Franklin Mine, Franklin, Sussex County, New Jersey, US.[6]

Both bustamite and johansennite are found at Franklin.[3] Bustamite is moderately common there and occurs in a variety of assemblages, associated with rhodonite and tephroite, calcite and tephroite or glaucochroite and tephroite. Vesuvianite, wollastonite, garnet, diopside, willemite, johannsenite, margarosanite and clinohedrite also may be present.

Environment

Bustamite typically results from metamorphism of manganese-bearing sediments, with attendant metasomatism. At the (new) type locality, Franklin, the oldest rocks are Precambrian gneisses of mixed sedimentary and volcanic origin. Franklin Marble was deposited within these rocks, along with sediments containing zinc, manganese and iron minerals. These sediments were metamorphosed later in the Precambrian, then the rocks were uplifted from the late Precambrian into the Cambrian and quartzite was deposited on the eroded surface. In Cambrian-Ordovician time the quartzite was in turn overlain by limestone, and the rocks have been subject to uplift and erosion up to the present time.[11]

gollark: oh *beeoformicite*.
gollark: Which is zero cost in the way most people mean, even though it takes compile time to solve the constraints and whatever.
gollark: In Rust (praise be), yes.
gollark: Yes, that.
gollark: They make function names in the binary mildly longer, no?

References

  1. http://rruff.info/ima
  2. Deer, W A, Howie, R A and Zussman, J (1978) Rock-Forming Minerals, 2nd edition, Volume 2A, pages 574-585
  3. http://franklin-sterlinghill.com/dunn/ch17/bustamite.stm
  4. Mineralienatlas
  5. http://www.webmineral.com/data/Bustamite.shtml
  6. http://www.mindat.org/min-809.html Mindat.org
  7. http://rruff.geo.arizona.edu/doclib/hom/bustamite.pdf Handbook of Mineralogy
  8. Peacor and Prewitt (1963) The American Mineralogist volume 48 pages 588 to 596
  9. Dana's New Mineralogy Eighth Edition, Wiley
  10. Alexandre Brongniart, « Sur la Bustamite, Bisilicate de manganèse et de chaux du Mexique », Annales des sciences naturelles, vol. VIII, Crochard, Libraire-Éditeur, Paris, 1826, p. 411-418
  11. Drake, A A (1990) The regional geologic setting of the Franklin-Sterling Hill district. Symposium on the character and origin of the Franklin-Sterling Hill orebodies, Proceedings, pp. 14-31, Lehigh University, Bethlehem, Pennsylvania
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.