Bob Christie (racing driver)
Bob Christie (April 4, 1924 – June 1, 2009) was an American racecar driver.
Born | April 4, 1924 |
---|---|
Died | June 1, 2009 85) | (aged
Formula One World Championship career | |
Nationality | |
Active years | 1954–1960 |
Teams | Kuzma, Kurtis Kraft, Lesovsky |
Entries | 7 (5 starts) |
Championships | 0 |
Wins | 0 |
Podiums | 0 |
Career points | 0 |
Pole positions | 0 |
Fastest laps | 0 |
First entry | 1954 Indianapolis 500 |
Last entry | 1960 Indianapolis 500 |
Christie raced in the USAC Championship Car series in the 1956-1963 seasons, with 15 career starts, including every Indianapolis 500 race in that span. He finished in the top ten 5 times, with his best finish in 3rd position in 1959 at Daytona. He died in Grants Pass, Oregon.
Indianapolis 500 results
|
|
Complete Formula One World Championship results
(key)
Year | Entrant | Chassis | Engine | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | WDC | Points |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1954 | Christy | Lesovsky | Offenhauser L4 | ARG | 500 DNQ |
BEL | FRA | GBR | GER | SUI | ITA | ESP | NC | 0 | ||
1955 | Dean Van Lines | Kuzma Indy Roadster | Dodge V8 | ARG | MON | 500 DNQ |
BEL | NED | GBR | ITA | NC | 0 | ||||
1956 | Helse / H.H. Johnson | Kurtis Kraft 500D | Offenhauser L4 | ARG | MON | 500 13 |
BEL | FRA | GBR | GER | ITA | NC | 0 | |||
1957 | Jones & Maley Cars | Kurtis Kraft 500C | Offenhauser L4 | ARG | MON | 500 13 |
FRA | GBR | GER | PES | ITA | NC | 0 | |||
1958 | Federal Engineering | Kurtis Kraft 500C | Offenhauser L4 | ARG | MON | NED | 500 14 |
BEL | FRA | GBR | GER | POR | ITA | MOR | NC | 0 |
1959 | Federal Engineering | Kurtis Kraft 500C | Offenhauser L4 | MON | 500 25 |
NED | FRA | GBR | GER | POR | ITA | USA | NC | 0 | ||
1960 | Federal Engineering | Kurtis Kraft 500C | Offenhauser L4 | ARG | MON | 500 10 |
NED | BEL | FRA | GBR | POR | ITA | USA | NC | 0 |
gollark: I *have* used them before, several times. Also NuclearCraft fusion.
gollark: I don't think they go up to 100MRF/t, but about 9.6.
gollark: Yes, but most things use less than that.
gollark: So after running a bunch in quick succession, the wither containment temporarily cut out and it escaped.
gollark: I did it with RFTools shields before, but as it turns out they actually burn through lots of RF resisting wither damage.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.