BSA M20
The BSA M20 was a British motorcycle made by Birmingham Small Arms Company (BSA) at their factory in Small Heath, Birmingham. Although initially viewed as a near failure by the War Office in 1936, the M20 evolved into one of the longest serving motorcycles in the history of British military motorcycling, as well as becoming the most numerous type produced for World War II with 126,000[1] in active service. Many are still in use around the world today.[2]
.JPG) | |
| Manufacturer | Birmingham Small Arms Company |
|---|---|
| Production | 1937–1955 |
| Engine | 496cc single cylinder side valve 4 stroke |
| Power | 13bhp @4,200 rpm |
| Transmission | 4 Speed / chain |
| Fuel capacity | 3 gallons |
Development
.jpg)
At the outbreak of World War II BSA were Britain's largest motorcycle manufacturer with a long history of armaments supply to the armed forces. Designed by Val Page the BSA M20 started development in 1937 as a heavy-framed sidecar model with a simple 500 cc single cylinder side valve engine. It had low compression and plenty of low-end torque through a standard BSA gearbox.[2]
Early K-M20 models from 1939 were made from standard civilian parts with the addition of military fittings, such as a large 8-inch Lucas DUl42 headlight (fitted with a black out mask), a timing-gear cover with a screw-in plug for access to the magneto drive-pinion nut and special filler caps for the petrol and oil tanks. These early military M20 models were also fitted with a long spiked prop stand on the rear nearside pivoted from a lug brazed on to the rear frame tube. Factory ledgers show that BSA exported K-M20 models to Sweden, South Africa and India, as well as civilian dealers and distributors.[3]
M20 factory bombing
BSA workers employed making the M20 were killed in an air raid on the BSA factory in Armoury Road, Small Heath, Birmingham on the night of Tuesday 19 November 1940. The factory was one of the main targets for the Luftwaffe and at 9.25pm a low flying aircraft dropped two bombs which destroyed the southern end of the BSA building in Armoury Road. Rescuers included BSA's own fire brigade who pumped the Birmingham and Warwick canal dry putting out the fire. As well as 53 workers killed, 89 were injured and it was six weeks before the last of the bodies could be recovered.[4] Much of the factory and equipment was destroyed or damaged but BSA had 67 factories so work was transferred elsewhere and production of the BSA M20 continued.[1]
Modifications
From October 1939 the K-M20 was designated the W-M20 and modified to include girder-forks and removal of the valanced rear mudguard. During late 1940 some civil specification M20s were purchased by the War Office which were civil models with a military paint scheme. In 1941 front and rear number plates were removed and between 1941 and 1942 active service use in North Africa showed the need for easy adjustment of the fork dampers. Special damper knobs were made of bakelite (later replaced with pressed steel). The DU142 headlight was replaced with a smaller 6 in Lucas DU42, with a hooded, slotted black-out shield, and a universal L-WD-MCT1A tail light was fitted.[3]
From 1942 there was a shortage of rubber so handlebar grips and foot pegs were replaced by canvas covered metal items and production was standardised, with only minor modifications until the end of World War II.[2] By early 1942 a new large rear carrier was fitted to hold universal WD steel pannier-frames and bags. This meant repositioning the long prop stand to forward of the nearside rear wheel spindle nut. In 1943 further modifications were made including redesign of the crankcase sump shield and fitting of the Vokes high capacity air cleaner, which was a box shaped canister on top of the fuel tank and was intended to assist operations in dusty environments.[5] In early 1945 a push-button switch was introduced for the headlight and the main lighting switch relocated to a bracket beneath the offside of the saddle.[3]
Military service
The M20 failed on its first submission to the War Office in 1936 due to 'unacceptable engine wear'. The prototype machine required a replacement piston and cylinder after approximately 6,000 miles. In 1937 three more M20s were submitted to the War Office for testing. Two of these machines only just passed the 10,000 mile suitability tests at Military Vehicles and Engineering Establishment, MVEE, Chertsey, while a third machine was used in service trials. In 1938 when a small batch was commissioned.[6] Criticised for being heavy and slow, with poor ground clearance it was saved by its reliability and ease of maintenance.[2] As the need for transport quickly gained pace orders were placed for larger quantities. Most BSA M20 motorcycles were used by the British Army but the Royal Navy and the Royal Air Force also commissioned M20's from BSA. Designed as a general-purpose motorcycle for convoy escort and dispatch use, the M20 saw action in almost every theatre of war. After the war the BSA M20 model continued in military service throughout the national service of the 1950s and in smaller numbers until the end of the 1960s, partly due to the low cost and easy availability of spare parts but also as a result of six years of harsh conditions with no serious failures.[6]
Civilian versions
The BSA M20 was a reliable and affordable form of post war transport, so BSA repainted the khaki WD models black and they became particularly popular as a sidecar motorcycle. The Automobile Association placed a large order and their yellow and black M20 combinations became a familiar sight on British roads. The 1945 wartime cast iron engine continued in production until 1951, when an alloy cylinder head was introduced but otherwise it remained largely unchanged.[7] Spares began to become harder to find in the 1950s, however, and the simple design was overtaken by modern twin cylinder motorcycles, so it was discontinued in 1956, but the 600cc M21 went on until 1963 when it was also discontinued.[8]
112 MPH BSA M20
As well as being painstakingly restored by enthusiasts to accurate wartime specification, the M20 has also been developed by specialists for speed trials. A 1938 BSA M20 ridden by Bill Jenkins from Dallas achieved a top speed of 108 mph at Bonneville Salt Flats making it the fastest M20 in the world. The original side-valve engine was extensively modified and fuelled with nitrous oxide. The intake port fed by the carburetor, originally horizontal, was re-drilled at a steep angle into the cylinder casting so it pointed up at the underside of the intake valve. The motorcycle did however retain the long BSA prop stand that hinged under the seat and clipped to the rear mudguard when not in use — so it looked like a stock M20.[9] In October 1995 an M20 fitted with a BSA Gold Star crankshaft sprocket and running on a 95% methanol / 5% acetone mix ridden by Pat Jeal achieved a terminal speed of 112 mph at the disused airfield of RAF Elvington, Yorkshire.[10]
See also
References
- De Cet, Mirco (2005). Quentin Daniel (ed.). The Complete Encyclopedia of Classic Motorcycles. Rebo International. ISBN 978-90-366-1497-9.
- Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN 1-86147-136-X.
- "BSA Model M20 496cc Facts". Archived from the original on 16 October 2008. Retrieved 10 January 2009.
- "BSA Memorial". Archived from the original on 29 December 2008. Retrieved 10 January 2009.
- Ware, Pat (2010). The Illustrated guide to military motorcycles. Anness Publishing Ltd. pp. 184–185. ISBN 978-1-84681-448-8.
- Orchard, C. J.; Madden S.J. (1997). British Forces Motorcycles 1925 – 45. Suton Publishing Ltd. ISBN 0-7509-1445-9.
- Westworth, Frank. The British Classic Bike Guide. Haynes Publishing. ISBN 1-85960-426-9.
- "Model recognition points". Archived from the original on 1 December 2008. Retrieved 10 January 2009.
- Bath, Bill. "BSA M20 Bonneville Racer". Retrieved 10 January 2009.
- Jeal, Pat. "BSA M20 & M21 Motor Mods". Archived from the original on 27 January 2009. Retrieved 10 January 2009.