Archdeacon of Birmingham

The Archdeacon of Birmingham is a senior ecclesiastical officer within the Diocese of Birmingham.

The archdeaconry was created within the Diocese of Worcester by Order-in-Council on 12 August 1892 (substantially from the Archdeaconry of Coventry but also from a small part of the Worcester archdeaconry)[1] but became part of the new Diocese of Birmingham upon its creation by Order-in-Council on 13 January 1905.[2]

The Archdeacon is responsible for the disciplinary supervision of the clergy[3] within the seven area deaneries: Central Birmingham, Edgbaston, Handsworth, Kings Norton, Moseley, Shirley, and Warley.

The current archdeacon is Jenny Tomlinson.[4].

List of archdeacons

The archdeaconry was transferred from the diocese of Worcester to the newly created diocese of Birmingham by Order-in-Council on 13 January 1905.[2]
gollark: Thanks!
gollark: I think this is technically possible to implement, so bee⁻¹ you.
gollark: This is underspecified because bee² you, yes.
gollark: All numbers are two's complement because bee you.
gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.