Alabama State Route 96

State Route 96 (SR 96) is a 30.680-mile (49.375 km)[1] east–west state highway in Lamar and Fayette counties in western Alabama, United States, that runs nearly entirely along the southern edge of the valley formed by Luxapallila Creek and connects Mississippi Highway 50 (MS 50) with Alabama State Route 18 (SR 18).

State Route 96
Route information
Maintained by ALDOT
Length30.680 mi[1] (49.375 km)
Major junctions
West end MS 50 at the Mississippi state line west of Millport
 
East end SR 18 in Fayette
Location
Counties
Highway system
  • Alabama Highways
← SR 95SR 97 →

Route description

Lamar County

SR 96 begins at the eastern terminus of MS 50 in the southwest corner of Lamar County, at the border of Mississippi and about 5 miles (8.0 km) east of Columbus, Mississippi. (MS 50 heads westerly to northwestern Columbus and a junction with U.S. Route 82.) From its western terminus, SR 96 runs easterly as a two-lane road. (For nearly the length of its route, SR 96 runs roughly parallel to, but south of, Luxapallila Creek and the Luxapalila Valley Railroad tracks.) From the state line, SR 96 heads east-northeast for about 6 miles (9.7 km) to reach a T intersection with the northern end of Liberty Road (Lamar County Road 75). Continuing east for about 5 more miles (8.0 km), it crosses Gentry Creek,[2] Shelton Branch,[3], and Propst Creek,[4] as it enters the town of Millport. Just before crossing Propst Creek, the route widens to four lanes.

Within Millport the road signed as "HWY 96" as it continues east to cross several city streets, including College Drive (which is also signed as Lamar County Road 27 heading south), before reaching the T intersection with northbound Alabama State Route 17 (SR 17) in the middle of town. (Within Millport, except for its concurrency with SR 96, SR 17 is signed as "HWY 17".) From that junction SR 17 heads north (crossing Luxapallila Creek) toward Hightogy and Vernon; and SR 96 continues east as a three-lane (with a center left-turn lane) running concurrent with southbound SR 17, but still signed as "HWY 96". After crossing Driver Creek[5] and several more city streets SR 96/SR 17 connects with the northern end of Lamar County Road 3 (signed as "County Rd 3"). Just east of this junction the route returns to a two-lane road (losing its center left-turn lane) and remains as such for the remainder of the route. Turning slightly north, SR 96/SR 17 connects with the ends of several more city streets and crosses Crane Creek[6] before leaving Millport.

After heading east-northeast for about 2 miles (3.2 km) SR 96/SR 17 crosses Rushing Creek[7] and Clear Creek[8] before reaching the town of Kennedy. Just after entering town, SR 96/SR 17 reaches a T intersection with southbound SR 17. (Within Kennedy, except for its concurrency with SR 96, SR 17 is again signed as "HWY 17".) From that junction, SR 17 heads southerly toward Palmetto and Reform; and SR 96 continues east-northeast. After connecting with the ends of several city streets, SR 96 crosses Lamar County Road 49 (CR 49) at a four-way intersection in the center of town. (CR 49 heads north as Alley Street [crossing Luxapallila Creek] toward Kingville and south as Pickens Street to SR 17.) After connecting with the ends of several more city streets, SR 96 reaches a T intersection with the northern end of Gorto Road (Lamar County Road 2) before leaving Kennedy. Upon leaving Kennedy, the route turns north-northeast and, about 2.7 miles (4.3 km) later, the route leaves Lamar County and enters Fayette County.[9][10]

Fayette County

Just after entering Fayette County, SR 96 very briefly curves north and slightly west before curving back to a northeastern course. About 1 mile (1.6 km) into the county, SR 96 enters the town of Belk and quickly comes to a T intersection with the northern end of Fayette County Road 1 (CR 1), which heads south-southeasterly to connect with the northern end of Fayette County Road 4 and then ends at Alabama State Route 159. After the junction with CR 1, SR 96 turns north-northeast to cross Beaver Creek[11] and then connect with the ends of several city streets before crossing Fayette County Road 6 (CR 6) at a four-way intersection. (CR 6 heads northwest [crossing Luxapallila Creek] to a junction with the eastern end of Lamar County Road 20 and then quickly ends at Lamar County Road 41. SR 6 heads southeasterly to end at a junction with Fayette County Road 4.) Continuing north-northeast within Belk, SR 96 (now also signed as "1st Street" through the rest of [the north part of] town) connects with the ends of several more city streets before turning northeast and leaving town.

Just after leaving Belk, SR 96 connects with the western end of Fayette County Road 16 (CR 16) at a T intersection. (CR 16 forms a southern loop off of SR 96, connecting with the western end of Fayette County Road 108 [CR 108] along the way.) About 2 miles (3.2 km) further on, SR 96 reaches the southern end of Fayette County Road 37 (CR 37) at another T intersection within the unincorporated community of Covin.[12] (CR 37 heads east to cross Luxapalila Valley Railroad and then north to cross Fayette County Route 23 before ending at SR 18.) Also in Covin, SR 96 turns easterly (leaving the valley of the Luxapalila Creek) and continues on to a T intersection with the southern end of Fayette County Road 21 South (CR 21) in the unincorporated community of Cedar Hill.[13] (CR 21 heads north to a junction with SR 18.) Just after the CR 21 junction, SR 96 comes to its eastern junction with CR 16 at another T intersection, also in Cedar Hill. (This section of the CR 16 loop is signed as Country Club Road.) About 0.8 miles (1.3 km) further east, SR 96 connects with Fayette County Road 106 (CR 106) at a four-way intersection. (CR 106 heads north as Taylor Road to connect with SR 18 in the city of Fayette and south as Valley View Road to end at CR 108.)

SR 96 then enters Fayette and quickly, but very briefly, turns north, then northeast before reaching its western terminus at SR 18 (Columbus Street West) at a three-way intersection on the western edge of the main part of town. (SR 18 heads northwest to Vernon and then southwest to the Mississippi state line [terminating at the northern end of Mississippi Highway 12]. SR 18 heads easterly to connect with U.S. Route 43 [US 43] at the northern end of Alabama State Route 107. SR 18 then leaves Fayette and continues east, running concurrent with US 43 for just over 13 miles [21 km] until US 43 turns south, while SR 18 continues east-northeasterly to its eastern terminus at Alabama State Route 69, just south of Oakman.)[9][1]

Major intersections
CountyLocation[9]mi[10][1]kmDestinationsNotes
Lamar​0.0000.000 MS 50 west (Mississippi Highway 50) – ColumbusContinuation west beyond western terminus
Mississippi state lineWestern terminus
​6.1879.957 CR 75 south (Liberty Road)
Millport CR 27 south (College Drive)
11.58718.647 SR 17 north – Hightogy, Vernon, SulligentWestern end of SR 17 concurrency
CR 3 south (County Road 3)
Kennedy15.84425.498 SR 17 south – Palmetto, ReformEastern end of SR 17 concurrency
17.52628.205 CR 49 (Alley Street / Pickens Street) – KingvilleSR 49 is signed as Alley Street northbound and Pickens Street southbound
CR 3 south (Gordo Road) – SR 159
Lamar–Fayette line​21.59434.752County line
FayetteBelk CR 1 south (County Road 1) – CR 4, SR 159
CR 6 (County Road 6) – CR 20 (Lamar County Road 20), CR 41 (Lamar County Road 41), CR 4
​25.76141.458 CR 16 east (County Road 16) – CR 108, Cedar Hill, SR 96Western end of the CR 16 southern loop off of SR 96
Covin CR 37 north (County Road 37) – CR 23, SR 18
Cedar Hill28.55945.961 CR 21 north (County Road 21 South) – SR 18Eastern end of southern loop off of SR 96
CR 16 west (Country Club Road) – CR 108, SR 96Eastern end of CR 16 southern loop off of SR 96
​ CR 106 (Taylor Road / Valley View Road) – CR 108, Fayette, SR 18SR 106 is signed as Taylor Road northbound and Valley View Road southbound
Fayette30.68049.375 SR 18Eastern terminus
SR 18 west – Vernon, MS 12 (Mississippi Highway 12)Continuation west beyond eastern terminus
SR 18 east – US 43 / SR 107, BankstonContinuation east beyond eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
gollark: That sounds like an implementation detail. Implementation details are BEES.
gollark: Πηφ
gollark: Think about it, though. Linux has disk drivers already. If you load Linux in, it can interface with disks for you.
gollark: Just run an instance of Linux on a spare CPU core and use its drivers.
gollark: Ah yes, just never make mistakes.

See also

References
  1. Milepost Map: Fayette County, Alabama (PDF) (Map). Alabama Department of Transportation. Aug 1999. Retrieved 13 Oct 2019 – via Milepost/General_Highway Maps.
  2. U.S. Geological Survey Geographic Names Information System: Gentry Creek
  3. U.S. Geological Survey Geographic Names Information System: Shelton Branch
  4. U.S. Geological Survey Geographic Names Information System: Propst Creek
  5. U.S. Geological Survey Geographic Names Information System: Driver Creek
  6. U.S. Geological Survey Geographic Names Information System: Crane Creek
  7. U.S. Geological Survey Geographic Names Information System: Rushing Creek
  8. U.S. Geological Survey Geographic Names Information System: Clear Creek
  9. Google (12 Oct 2019). "AL-96, Alabama" (Map). Google Maps. Google. Retrieved 12 Oct 2019.
  10. Milepost Map: Lamar County, Alabama (PDF) (Map). Alabama Department of Transportation. Aug 1999. Retrieved 13 Oct 2019 – via Milepost/General_Highway Maps.
  11. U.S. Geological Survey Geographic Names Information System: Beaver Creek
  12. U.S. Geological Survey Geographic Names Information System: Covin
  13. U.S. Geological Survey Geographic Names Information System: Cedar Hill

KML is from Wikidata

Media related to Alabama State Route 96 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.