Akkrum railway station

Akkrum
Akkrum
Location	Netherlands
Coordinates	53°2′50″N 5°50′35″E
Line(s)	Arnhem–Leeuwarden railway
History
Opened	1 September 1868
Services
Location
	Akkrum Location within Netherlands

Akkrum is a railway station located in Akkrum, Netherlands. The station was opened on 1 September 1868 and is located on the Arnhem–Leeuwarden railway. The services are operated by Nederlandse Spoorwegen.

Train services

Route	Service type	Operator	Notes
Meppel - Heerenveen - Leeuwarden Hauptbahnhof	Local ("Sprinter")	NS	Mon-Fri during daytime hours 2x per hour - On evenings and Sundays, this train operates 1x per hour

Bus services at this station are operated by Arriva.[1]

Line	Route	Operator	Notes
11	(Drachten - Beetsterzwaag -) Nij Beets - Aldeboarn - Akkrum	Arriva	The route between Drachten and Nij Beets is only served during rush hours. During school breaks, off-peak hours, evenings and weekends, this bus only operates one hour before its supposed departure ("belbus").
28	Heerenveen - Haskerdijken - Akkrum - Jirnsum - Grou - Leeuwarden	Arriva	Mon-Fri during daytime hours only.
612	De Veenhoop - Drachten/Akkrum	Arriva	This bus only operates if called 1,5 hours before its supposed departure ("belbus").
613	Goëngahuizen - Akkrum	Arriva	This bus only operates if called 1,5 hours before its supposed departure ("belbus").
621	Gorredijk - Tijnje - Uilesprong - Aldeboarn - Akkrum	Arriva	One run during morning rush hour and one during afternoon rush hour. No service during school breaks.
838	Jirnsum - Grou/Akkrum	Arriva	This bus only operates if called 1,5 hours before its supposed departure ("belbus"). This bus only operates during evenings and Sunday mornings.
839	Terherne - Akkrum/Joure	Arriva	This bus only operates if called 1,5 hours before its supposed departure ("belbus"). This bus only operates during evenings and Sunday mornings.
840	Nes - Akkrum	Arriva	This bus only operates if called 1,5 hours before its supposed departure ("belbus").

gollark: Normally you'd use a library for them.

gollark: I would probably use parser combinators. They're a nice way of parsing structures like that.

gollark: How very descriptive.

gollark: "Use lists".

gollark: Well, describe your syntax and the ASTs you want.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.