Advanced Aeromarine Sierra

Sierra
Role	Glider
National origin	United States
Manufacturer	Advanced Aeromarine
First flight	March 1991
Status	Production completed
Number built	1 (1998)
Unit cost	US$9,995 (1998)
Variants	Moyes Tempest

The Advanced Aeromarine Sierra was an American high-wing, strut-braced, single-seat, glider that was designed and produced by Advanced Aeromarine, as a kit for amateur construction.[1][2]

Design and development

The Sierra was intended as a lightweight and affordable glider with modest performance that could be launched by ultralight aircraft aerotow, auto-tow, winch-launch or bungee launch. It first flew in March 1991.[1][2]

The aircraft was made from aluminium tube, fabric and composites. Its 42.65 ft (13.0 m) span wing was supported by a lift strut and jury struts. The glide ratio was 25:1 and had a landing roll of 150 ft (46 m). The landing gear was tandem wheels, plus a tail caster. The completion time from the factory kit was rated as 150 hours.[1][2]

Although very light, with a standard empty weight of 205 lb (93 kg), the Sierra did not qualify under the US FAR 103 Ultralight Vehicles regulations as a hang glider, neither was it foot-launchable. Only one prototype had been reported as completed by December 1998.[1][2]

Operational history

In September 2011 there were no Sierras registered with the US Federal Aviation Administration and it is likely that none exist anymore.[3]

Variants

Sierra LS: Main production version[1]

Specifications (Sierra LS)

Data from Purdy and KitPlanes[1][2]

General characteristics

Crew: one
Length: 21 ft 0 in (6.40 m)
Wingspan: 42 ft 7.8 in (13.000 m)
Wing area: 142 sq ft (13.2 m²)
Aspect ratio: 13:1
Empty weight: 205 lb (93 kg)
Gross weight: 455 lb (206 kg)

Performance

Stall speed: 27 mph (43 km/h, 23 kn)
Maximum glide ratio: 25:1 at 40 mph (64 km/h)
Wing loading: 3.2 lb/sq ft (16 kg/m²)

gollark: *can't tell if bizarre joke or not*

gollark: +<insult

gollark: +<insult]

gollark: Oh, BEE YOU Epicbot.