3-Methylpyridine

3-Methylpyridine or 3-picoline, is an organic compound with formula 3-CH3C5H4N. It is one of three positional isomers of methylpyridine, whose structures vary according to where the methyl group is attached around the pyridine ring. This colorless liquid is a precursor to pyridine derivatives that have applications in the pharmaceutical and agricultural industries. Like pyridine, 3-methylpyridine is a colorless liquid with a strong odor and is classified as a weak base.

3-Methylpyridine
Names
Preferred IUPAC name
3-Methylpyridine
Other names
3-Picoline
Identifiers
3D model (JSmol)
1366
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.003.307
EC Number
  • 203-636-9
2450
RTECS number
  • TJ5000000
UNII
UN number 2313
Properties
C6H7N
Molar mass 93.13 g/mol
Appearance Colorless liquid
Density 0.957 g/mL
Melting point −19 °C (−2 °F; 254 K)
Boiling point 144 °C (291 °F; 417 K)
Miscible
-59.8·10−6 cm3/mol
Hazards
GHS pictograms
GHS Signal word Danger
GHS hazard statements
 H226, H302, H311, H311, H314, H315, H318, H319, H331, H332, H335
P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+312, P301+330+331, P302+352, P303+361+353, P304+312, P304+340, P305+351+338, P310, P311, P312, P321, P322, P330
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Synthesis

3-Methylpyridine is produced industrially by the reaction of acrolein with ammonia:

2 CH2CHCHO + NH3 → 3-CH3C5H4N + 2 H2O

This reaction also affords substantial amounts of pyridine. A route that gives better control of the product starts with acrolein, propionaldehyde, and ammonia:

CH2CHCHO + CH3CH2CHO + NH3 → 3-CH3C5H4N + 2 H2O + H2

In practice, this reaction also produces substantial amounts of pyridine as a result of dealkylation of the 3-methylpyridine over the oxide catalyst. It may also be obtained as a co-product of pyridine synthesis from acetaldehyde, formaldehyde, and ammonia via Chichibabin pyridine synthesis. Approximately 9,000,000 kilograms were produced worldwide in 1989. It has also been prepared by dehydrogenation of 3-methylpiperidine, derived from hydrogenation of 2-methylglutaronitrile.[1]

Uses

3-Picoline is a useful precursor to agrochemicals, such as chlorpyrifos.[2] Chlorpyrifos is produced from 3,5,6-trichloro-2-pyridinol, which is generated from 3-picoline by way of cyanopyridine. This conversion involves the ammoxidation of 3-methylpyridine:

3-CH3C5H4N + 1.5 O2 + NH3 → 3-NCC5H4N + 3 H2O

3-Cyanopyridine is also a precursor to 3-pyridinecarboxamide,[3][4][5] which is a precursor to pyridinecarbaldehydes:

3-NCC5H3N + [H] + catalyst → 3-HC(O)C5H4N

Pyridinecarbaldehydes are used to make antidotes for poisoning by organophosphate acetylcholinesterase inhibitors.

Environmental behavior

Pyridine derivatives (including 3-methylpyridine) are environmental contaminants, generally associated with processing fossil fuels, such as oil shale or coal.[6] They are also found in the soluble fractions of crude oil spills. They have also been detected at legacy wood treatment sites. The high water solubility of 3-methyl pyridine increases the potential for the compound to contaminate water sources. 3-methyl pyridine is biodegradable, although it degrades more slowly and volatilize more readily from water samples than either 2-methyl- or 4-methyl-pyridine.,[7][8]

Niacin

3-Methylpyridine is the main precursor to niacin, one of the B vitamins. Niacin is the generic name for both nicotinic acid and nicotinamide (pyridine 3-carboxylic acid and pyridine 3-carboxamide, respectively). Nicotinic acid was first synthesized in 1867 by oxidative degradation of nicotine.[9] Niacin is also an important food additive for domestic and farm animals; more than 60% of the niacin produced is consumed by poultry, swine, ruminants, fish, and pets. Along with its use as an essential vitamin, niacin is also a precursor to many of commercial compounds including cancer drugs, antibacterial agents, and pesticides. Approximately 10,000,000 kilograms of niacin are produced annually worldwide.[9]

Niacin is prepared by hydrolysis of nicotinonitrile, which, as described above, is generated by oxidation of 3-picoline. Oxidation can be effected by air, but ammoxidation is more efficient.[9] The catalysts used in the reaction above are derived from the oxides of antimony, vanadium, and titanium. New "greener" catalysts are being tested using manganese-substituted aluminophosphates that use acetyl peroxyborate as non-corrosive oxidant.[10] The use of this catalyst/oxidizer combination is greener because it does not produce nitrogen oxides as do traditional ammoxidations.

gollark: Persistent data structure good?!
gollark: I asked the committee and they said so.
gollark: Make it immutable, bee. Macron is a purely functional language.
gollark: The project codenames thing really was an excellent innovation if I do say so myself, which I do, which is why I said it.
gollark: I can also nitpick structure and style.

See also

References
  1. Eric F. V. Scriven; Ramiah Murugan (2005). "Pyridine and Pyridine Derivatives". Kirk-Othmer Encyclopedia of Chemical Technology. XLI. doi:10.1002/0471238961.1625180919031809.a01.pub2.
  2. Shinkichi Shimizu; Nanao Watanabe; Toshiaki Kataoka; Takayuki Shoji; Nobuyuki Abe; Sinji Morishita; Hisao Ichimura (2002). "Pyridine and Pyridine Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a22_399.
  3. Nagasawa, Toru; Mathew, Caluwadewa Deepal; Mauger, Jacques; Yamada, Hideaki (1988). "Nitrile Hydratase-Catalyzed Production of Nicotinamide from 3-Cyanopyridine in Rhodococcus rhodochrous J1". Appl. Environ. Microbiol. 54 (7): 1766–1769.
  4. Ulber, Roland; Sell, Dieter, eds. (2007). "Building Blocks". White Biotechnology. Advances in Biochemical Engineering / Biotechnology. 105. Springer Science & Business Media. pp. 133–173. doi:10.1007/10_033. ISBN 9783540456957.
  5. Schmidberger, J. W.; Hepworth, L. J.; Green, A. P.; Flitsch, S. L. (2015). "Enzymatic Synthesis of Amides". In Faber, Kurt; Fessner, Wolf-Dieter; Turner, Nicholas J. (eds.). Biocatalysis in Organic Synthesis 1. Science of Synthesis. Georg Thieme Verlag. pp. 329–372.
  6. Sims, G. K. and E.J. O'Loughlin. 1989. Degradation of pyridines in the environment. CRC Critical Reviews in Environmental Control. 19(4): 309-340.
  7. Sims, G. K. and L.E. Sommers. 1986. Biodegradation of pyridine derivatives in soil suspensions. Environmental Toxicology and Chemistry. 5:503-509.
  8. Sims, G. K. and L.E. Sommers. 1985. Degradation of pyridine derivatives in soil. J. Environmental Quality. 14:580-584.
  9. Manfred Eggersdorfer; et al. (2000). "Vitamins". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a27_443.
  10. Sarah Everts (2008). "Clean Catalysis: Environmentally friendly synthesis of niacin generates less inorganic waste". Chemical & Engineering News. ISSN 0009-2347.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.