2,6-Di-tert-butylphenol
2,6-Di-tert-butylphenol is an organic compound with the structural formula 2,6-((CH3)3C)2C6H3OH. This colorless solid alkylated phenol and its derivatives are used industrially as UV stabilizers and antioxidants for hydrocarbon-based products ranging from petrochemicals to plastics.[1] Illustrative of its usefulness, it prevents gumming in aviation fuels.
Names | |
---|---|
Preferred IUPAC name
2,6-Di-tert-butylphenol | |
Other names
2,6-Bis(1,1-dimethylethyl)phenol Dibutylphenol 2,6-Bis(tert-butyl)phenol 2,6-Di(1,1-dimethylethyl)phenol 2,6-DTBP Ethanox 701 Ethyl 701 Ethyl AN 701 Irganox L 140 Isonox 103 TK 12891 | |
Identifiers | |
3D model (JSmol) |
|
ChEBI | |
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.004.441 |
EC Number |
|
PubChem CID |
|
RTECS number |
|
UNII | |
UN number | 2430, 3077 |
CompTox Dashboard (EPA) |
|
| |
| |
Properties | |
C14H22O | |
Molar mass | 206.329 g·mol−1 |
Appearance | Low-melting colourless solid |
Melting point | 34 to 37 °C (93 to 99 °F; 307 to 310 K) |
Boiling point | 253 °C (487 °F; 526 K) |
Hazards | |
GHS pictograms | |
GHS Signal word | Warning |
GHS hazard statements |
H315, H319, H400, H410 |
P264, P273, P280, P302+352, P305+351+338, P321, P332+313, P337+313, P362, P391, P501 | |
Flash point | 118°C |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
Infobox references | |
Production
2,6-Di-tert-butylphenol is prepared industrially via the Friedel–Crafts alkylation of phenol with isobutene catalyzed by aluminium phenoxide:
- C6H5OH + 2 CH2=C(CH3)2 → ((CH3)3C)2C6H3OH
In this way, approximately 2.5M kg/y are produced.[2]
Applications
Its dominant use is as an antioxidant.
2,6-di-tert-butylphenol is a precursor to more complex compounds used as antioxidants and light-protection agents for the stabilization for polymers. Of particular note is methyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate (CAS# 6386-38-5), which is formed by the Michael addition of methyl methacrylate. This compound is used as a feedstock in the synthesis of more complex antioxidants such as Irganox 1098. 2,6-Di-tert-butylphenol is also used in the synthesis of CGP-7930, probucol, and nicanartine.
Safety and regulation
The LD50 is 9200 mg/kg, indicating a low toxicity.[2]
2,6-Di-tert-butylphenol is covered by the U.S. Department of Transportation Code of Federal Regulations 49 CFR 172.101, Appendix B (20 Dec 2004). This substance is designated by the U.S. Department of Transportation (DOT) as a marine pollutant.
References
- Peter P. Klemchuk (2005). "Antioxidants". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a03_091.
- Helmut Fiege; Heinz-Werner Voges; Toshikazu Hamamoto; Sumio Umemura; Tadao Iwata; Hisaya Miki; Yasuhiro Fujita; Hans-Josef Buysch; Dorothea Garbe (2002). "Phenol Derivatives". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a19_313.