.30 Remington

The .30 Remington cartridge was created in 1906 by Remington Arms. It was Remington's rimless answer to the popular .30-30 Winchester cartridge. Factory ammunition was produced until the late 1980s, but now it is a prospect for handloaders. Load data for the .30-30 Winchester can be used safely for the .30 Remington.

For the 2008-vintage cartridge designed to fit in the Remington R-15, see .30 Remington AR.
.30 Remington
.30 Remington (center) with .223 Rem (left) and .308 Win (right).
TypeRifle
Place of originUnited States
Production history
DesignerRemington Arms
Designed1906
ManufacturerRemington Arms
Produced1906-1980s
Specifications
Case typeRimless
Bullet diameter.308 in (7.8 mm)
Base diameter.421 in (10.7 mm)
Rim diameter.422 in (10.7 mm)
Rim thickness.045 in (1.1 mm)
Case length2.06 in (52 mm)
Overall length2.525 in (64.1 mm)
Maximum CUP38000 CUP
Ballistic performance
Bullet mass/type Velocity Energy
150 gr (10 g) Core-Lokt Round Nose 2,123 ft/s (647 m/s) 1,500 ft⋅lbf (2,000 J)
150 gr (10 g) Core-Lokt Round Nose 2,364 ft/s (721 m/s) 1,859 ft⋅lbf (2,520 J)
170 gr (11 g) Core-Lokt HP RN 1,893 ft/s (577 m/s) 1,350 ft⋅lbf (1,830 J)
170 gr (11 g) Core-Lokt HP RN 2,114 ft/s (644 m/s) 1,682 ft⋅lbf (2,280 J)
Test barrel length: 22"
Source(s): http://www.chuckhawks.com/30_Rem.htm

Background

Although the cartridge has dwindled into obscurity it lives on by being the parent case of the 10mm Auto[1][2] and the 6.8mm Remington SPC cartridge. Unlike the .30-30, the .30 Remington can utilize standard pointed bullets rather than round nosed ones when used in rifles with box magazines (Remington Model 8) and ones with special tubular magazines (Remington Model 14). This gives it a possible advantage over the .30-30 cartridge which is most often chambered in lever-action rifles with standard tubular magazines (in which a conventional pointed bullet could lead to cartridges being ignited in the magazine tube by recoiling into a primer).

While the .30 Remington is ballistically equivalent to the .30-30 Winchester cartridge, the cartridges are dimensionally different and are not interchangeable. However, .30 Remington cases can be made from .30-30 cases by turning off the rim, cutting an extractor groove, and fire-forming the shoulder.

gollark: I don't have one either. They are foolish devices.
gollark: Yes.
gollark: Is it really *so* hard to just physically go over there and press the button that they made it voice activated?
gollark: You can actually buy your own personal autoMELON™ device from GTech, too!
gollark: It uses pollution-free "just spin around and break melons if detected" technology.

See also

References
  1. Donnelly, John J. (1987). The Handloader's Manual of Cartridge Conversions. Stoeger Publishing. p. 941. ISBN 978-0-88317-269-8.
  2. Howell, Ken (1995). Designing and Forming Custom Cartridges. Precision Shooting. p. 546. ISBN 0-9643623-0-9.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.