.280 British

The .280 British was an experimental rimless bottlenecked intermediate rifle cartridge. It was later designated 7 mm MK1Z, and has also been known as 7 mm NATO, .280/30, .280 Enfield, .280 NATO, 7 mm FN Short, and 7×43mm.

.280 British
Various .280 Ball Cartridges. Orange cased cartridge is made out of aluminium.
TypeRifle
Place of originUnited Kingdom
Service history
Used byBritish
Production history
DesignerBritish Army
Designed1945
Specifications
Case typerimless bottlenecked [1]
Bullet diameter.284 in (7.2 mm)
Neck diameter.313 in (8.0 mm)
Shoulder diameter.448 in (11.4 mm)
Base diameter.470 in (11.9 mm)
Rim diameter.473 in (12.0 mm)
Rim thickness.049 in (1.2 mm)
Case length1.71 in (43 mm)
Overall length2.54 in (65 mm)
Ballistic performance
Bullet mass/type Velocity Energy
139 gr (9 g) Ball 2,545 ft/s (776 m/s) 1,999 ft⋅lbf (2,710 J)
140 gr (9 g) Ball
7 mm Mk 1Z		 2,549 ft/s (777 m/s) 2,019 ft⋅lbf (2,737 J)
Source(s): Cartridge of the World [2]

Like most armed forces in the immediate post-World War II era, the British Army began experimenting with lighter rounds after meeting the German StG 44 in combat. The Army began development in the late 1940s, with subsequent help from Fabrique Nationale in Belgium and the Canadian Army. The .280 British was tested in a variety of rifles and machine guns including the EM-2, Lee–Enfield, FN FAL, Bren, M1 Garand and Taden gun.

Despite its success as an intermediate cartridge, the .280 British was not considered powerful enough by the U.S. Army and several variants of the .280 British were created in an attempt to appease the U.S. Army. However, the U.S. Army continued to reject these variants, ultimately adopting the cartridge that was then designated the 7.62×51mm NATO.

History

Impetus

During World War II the standard British rifle and machine gun round was the venerable .303 British. Efforts to replace the .303 with a more modern round predated even World War I, but a series of events kept it in service in spite of its rimmed design causing a number of problems.

During the war the Allies encountered the new 7.92 "Kurz" cartridge on the battlefield and noted its effectiveness. The Kurz was an "intermediate power" round, less than a conventional rifle round like the .303, but more than pistol rounds like the 9mm Parabellum. This gave the Kurz rifle-like performance in close-range encounters, while still having a small enough recoil that it could be fired in fully automatic fire. This led British small arms designers to begin development of their own intermediate round.

The goal of the British designers was to create a cartridge that would replace all small arms in .303 calibre including the Bren, the No.4 Rifle and the Vickers medium machine gun with a cartridge suitable for a "light rifle". Thus the cartridge had to demonstrate ballistic performance equal to that of a full powered rifle round, yet exhibit as little recoil and blast as possible. This appeared possible through improved bullet shaping. A shorter cartridge producing lower recoil also enabled the weapon to be shorter and lighter, and hence easier to use.

Selection of the .280

After extensive tests by the "Ideal Cartridge Panel" in 1945, the British decided upon two 7 mm cartridges – the .270 and the .276. Both designations reflected the measurement of the distance between the rifling lands in the cartridges' respective barrels; the .276 bullet's actual diameter was .284 inches (7.2 mm). In order to focus their efforts, the British ceased research on the .270 and concentrated their efforts on the .276. The .276 was later renamed the .280 British even though no dimensions were changed.

Recoil of the .280 British cartridge was calculated to be a little under half of the .303. Long range performance actually surpassed that of the .303, and shooters reported that it was much more comfortable to fire with the reduced recoil and reduced blast. It seemed that the British designers had accomplished their goals, and proceeded to introduce the cartridge to their NATO allies.

.280/30 British sectioned cartridges. Bullet types from left to right: type C mild steel core, type B 140 gr ball and type S12 140 gr ball based on the 1913 pattern 7×57mm Mauser spitzer bullet that was chosen for the 7 mm MK1.[3]
From left to right: .30-06 Springfield, .280 British and 7.62×51mm NATO cartridges.

Counterparts in Belgium and Canada proved very interested, and the Belgian company FN would introduce their own gun designs based on the .280 as well as produce the rounds in quantity. However, the Americans refused to adopt a calibre under .30 inch, or with ballistics inferior to the then-standard .30-06 Springfield round. The British then attempted to appease the Americans though a series of changes to the round. The first was a small change to the rim diameter of the .280 to the size of the .30-06 Springfield to produce the .280/30 cartridge, which was produced in large numbers and is the basis of the dimensions listed to the right. The .280/30 cartridge weighed 20.3 grams (313 gr), making it a rather heavy cartridge by intermediate standards.

When the .280/30 was rejected by the Americans as being too weak with too great a drop in trajectory beyond 800 yards (732 m), the British and Belgians made larger changes to the cartridge design. These resulted in several different variations; one was just a .280/30 with the bullet seated less deeply so more powder could be put in the case, another was a T65 cartridge case necked down to 7 mm. The different cartridges that the British and Belgians eventually came up with fired 140-grain (9.1 g) bullets at around 2,700 to 2,800 feet per second (820 to 850 m/s), but with a much greater blast and recoil than the .280/30, which defeated the design parameters of the initial .280 concept.

Unsatisfied with the U.S. Army's response on the issue, the British adopted the EM-2 and the .280/30 as their primary rifle and ammunition in 1951 with the .280/30 being re-designated as the "7 mm MK1Z".

Selection of 7.62 NATO

Britain, Canada and the United States, founding members of NATO, had all signed an agreement that member states would develop and deploy common small arms and cartridges, developed through competitive trials in co-operation together. Britain and Canada had been open about their developments, and the Americans claimed they were not developing a round of their own and were known to be trialing the British designs.

In fact, Colonel Rene Studler, head of the US Small Arms Bureau of Ordnance had been diametrically opposed to a bullpup design and the .280 cartridge, and had started two secret projects on a .30 calibre cartridge. These were the T25 rifle at Springfield Armory under the direction of Earle Harvey, firing the T65 cartridge being developed at Frankford Arsenal. Between 1947 and 1952 the British and Canadians made clear to the United States they were aware of their secret work, stating that it was against the open, collaborative nature of the agreement, making their disapproval clear.

Matters took a turn for the worse when Rene Studler went on record, stating that, any non-American design was "a waste of time" and refused point blank to accept any "foreign" design.[4] It was learned that Studler had gone so far as to bury reports that suggested the .280 was superior in US testing. During firing tests in 1950 at the Aberdeen Proving Ground the Maximum Average Pressure (MAP) for .280 British ball ammunition was measured at 43,600 psi (300.6 MPa). The highest measured maximum pressure was 47,300 psi (326.1 MPa).[5]

A change of government meant that the 7 mm, EM-2 and Taden gun projects were abandoned soon afterwards by Winston Churchill, who returned as the prime minister and desired commonality between the NATO countries. Small amounts of .280 British ammunition were later produced during the 1960s for various small arms trials. At the same time, the British and Canadians, who were very impressed with the cartridge originally planned to have their FN FAL rifles chambered in .280. However, eventually, they agreed to a quid pro quo where the British would use the US-derived .30 (by now the 7.62) while the Americans accepted the FN FAL. This too proved not to be the case, and the US eventually chose their M14 rifle over the FAL.

After .280

The .280 British concept would later prove to have been far ahead of its time, as the U.S. itself adopted an intermediate cartridge — 5.56×45mm NATO — by the end of the following decade. Soon after America's large-scale involvement in Vietnam commenced in 1965 the 5.56×45mm NATO ArmaLite AR-15 rifle, later standardised as the M16, was purchased in ever increasing numbers and by the late 1960s had displaced the 7.62×51mm NATO M14 rifle in combat units. After insisting on a .30 calibre round with full-power ballistics almost identical to those of the existing .30-06 Springfield, the U.S. then adopted the 5.56×45mm NATO intermediate cartridge, which demonstrated the emergence and dominance of intermediate cartridges on the battlefield (the other notable one being the 7.62×39mm AK-47 round). The adoption of the 7.62×51mm NATO round and the adaptation of the intermediate cartridge CETME (later developed into the Heckler & Koch G3) and FN FAL designs to fire it, produced rifles that were relatively longer and heavier and had greater recoil. The result was weapons that performed well as longer-range semi-automatic rifles, but were more cumbersome and only marginally controllable in automatic fire. These guns also had a higher training burden and were not well suited to soldiers of smaller stature, again due to the recoil. Coincidentally, in 2002 the Americans developed a military calibre intended for the M4 version of the M16 family called the 6.8mm Remington SPC — with similar ballistic properties to the .280 British cartridge — which was intended to provide better ballistics than the 5.56×45mm NATO.

In the late 1960s, a version of the .280 British was created using a 6.25 mm bullet in a necked-down .280 British case. It was designed in response to experiments in the U.K. trying to find an ideal military small-arms round. Large caliber bullets were calculated to need more energy to penetrate various levels of body armor to inflict disabling wounds on soldiers. Out of several "optimum solutions" ranging from 4.5 mm to 7 mm, the 6.25 mm was the preferred solution. The 100 gr (6.5 g) bullet had a muzzle velocity of 2,680 ft/s (820 m/s) and 2,160 J (1,590 ft⋅lb) of muzzle energy. While the 7.62×51mm NATO required 700 joules (520 ft⋅lb) of force on impact to penetrate helmets and heavy body armor, the 6.25 mm required only 580 joules (430 ft⋅lb) of impact force to deliver the same penetration effects out to 600 m. It remained effective for a longer distance and produced recoil closer to that of the 5.56×45mm NATO.[6] However, it was not designed for very long range and its bullet was relatively light.[7] Testing of the 6.25×43mm was conducted from 1969 to 1971, when development ceased in favor of the smaller 4.85×49mm.[8]

Specifications
NameBullet DiameterCase LengthRimBaseShoulderNeckOALMVBullet Weight
.280 British7.214 mm (0.2840 in)43.434 mm (1.7100 in)12.01 mm (0.473 in) for the .280/30
11.633 mm (0.4580 in) for the .280 British		---64.516 mm (2.5400 in)Approx. 2,500 ft/s (760 m/s) with 140-grain (9.1 g) bullet130–140 gr (8.4–9.1 g)

Types of bullets and colours of tips:

  • AP (130 gr or 8.4 g)
  • API (130 gr or 8.4 g): black
  • Ball (130–140 gr or 8.4–9.1 g): plain (unmarked), green, pink, yellow, brown
  • Observation (130 gr or 8.4 g) (6 gr or 0.39 g WP): red
  • Tracer (130 gr or 8.4 g): white

Note: Most cartridges have been observed with a purple annulus. Several experimental cartridge cases were made out of aluminium, in various colors including orange.

Known manufacturers:

Performance

The following comparisons are excerpts from a manual published by the "Small Arms Group Armament Design Establishment" from the Ministry of Supply:[9]

.280 British .303 British Mark VII .30-06 Springfield
Bullet weight 139 gr or 9.0 g 174 gr or 11.3 g 166 gr or 10.8 g
Muzzle velocity 2,500 ft/s or 760 m/s 2,456 ft/s or 749 m/s 2,770 ft/s or 840 m/s
Timber penetration at 2,000 yards (1,829 m) 2.9 in or 74 mm 2.4 in or 61 mm 1.6 in or 41 mm
Timber penetration at 100 yards (91 m) 45 in or 114 cm 42 in or 107 cm 47 in or 119 cm
Range for penetration of airborne type steel helmet 1,000 yd or 914 m 900 yd or 823 m 1,600 yd or 1,463 m
Vertex height for 600-yard (549 m) range 3.3 ft or 101 cm 3.1 ft or 94 cm 3 ft or 91 cm
Recoil energy per round 7.4 ft⋅lbf or 10.0 J with EM-2 rifle 11 ft⋅lbf or 15 J with No.4 Rifle 14.4 ft⋅lbf or 19.5 J with M1 Garand

Variants
  • .270 British: Designed at the same time as the .280 British . It has a slightly smaller bullet diameter of .279 in (7.1 mm) (versus .284 in or 7.2 mm for the .280) but a lighter bullet (93 to 100 gr or 6.0 to 6.5 g) with a greater muzzle velocity (2,750–2,800 ft/s or 840–850 m/s), longer case (1.8 in or 46 mm) and shorter overall length (2.45 in or 62 mm). Research was abandoned in 1948.
  • 7 mm "Optimum": The original .280 British round with the bullet seated less deeply, giving an overall length of 2.6 in (66 mm).
  • 7 mm "High Velocity": Longer case (1.95 in or 50 mm), with an overall length of 2.79 in (71 mm). Similar 140-grain (9.1 g) bullet fired at 2,750 ft/s (838 m/s).
  • 7 mm "Compromise" (aka T65/7 mm): Necked down T65 (7.62×51mm NATO) to 7 mm. Case length 2 in (51 mm), overall length 2.8 in (71 mm), similar 140-grain (9.1 g) bullet fired at 2,800 ft/s (850 m/s).
  • 7 mm "Second Optimum" (7×49 mm): Designed by FN. Also known as the 7 mm "Medium" and the 7 mm "Liviano". FN would later sell FAL rifles chambered in this calibre along with a sizeable amount of ammunition to Venezuela. Longer case (1.935 in or 49.1 mm) with an overall length of 2.78 in (71 mm). 140-grain (9.1 g) bullet fired at 2,755 ft/s (839.7 m/s).
  • 6.25 mm (6.25×43 mm): A British experimental cartridge designed during the early 1970s, using the .280/30 as a parent case, which was necked down to fit a smaller bullet.

Comparable cartridges
From left to right: 6mm SAW, 6.5mm Grendel, 6.8mm SPC, 7mm Bench Rest, .280/30 British, 7 mm-08, 7mm Second Optimum (Liviano), .276 Pedersen, .308×1.75", 7.62×51mm NATO.

For .280 British:

For 7 mm HV, 7 mm Compromise, 7 mm Second Optimum:

gollark: Soon login can occur
gollark: Exciting news: minoteaur SQLite3 session backend.
gollark: Exciting. I made Nim generate invalid C by accident.
gollark: The meme template.
gollark: What's that from, anyway?

See also

References
  1. The Handloader's Manual of Cartridge Conversions, Book by John J. Donnelly, Stoeger Publishing, 1987, ISBN 978-0-88317-269-8 p. 286
  2. Cartridges of the World 11th Edition, Book by Frank C. Barnes, Edited by Stan Skinner, Gun Digest Books, 2006, ISBN 0-89689-297-2 p. 349
  3. "British Military Cartridges .280/30 Enfield". Archived from the original on 2015-01-03. Retrieved 2014-12-31.
  4. Holland, Laurie (14 May 2009). "Modern Military Masterpieces: The British .280/30". Blaze Publishing. Retrieved 26 August 2015.
  5. A Comparison of United Kingdom and United States Ammunition for Lightweight Weapons, Ninth Report of Project TS2-2015, Volume I (PDF) (Technical report). Development and Proof Services, Aberdeen Proving Grounds Maryland. 5 June 1950. pp. 19–22.
  6. ASSAULT RIFLES AND THEIR AMMUNITION: HISTORY AND PROSPECTS by Anthony G Williams
  7. "The Case for a General-Purpose Rifle and Machine Gun Cartridge (GPC) by Anthony G Williams". Archived from the original on 2014-11-09. Retrieved 2014-11-09.
  8. 6.25x43mm Experimental - Militarycartridges.nl
  9. Reprinted by Dugelby, Thomas B.. EM-2 Concept & Design; a rifle ahead of its time, Collector Grade Publications, 1980, p. 247
  • Dugelby, Thomas B. (1980). EM2: Concept and Design. Toronto: Collector Grade Publications.
  • Labbett, P; P.J.F Mead. Technical Ammunition Guide: British 7 mm Ammunition.
  • Stevens, R. Blake (1993). The FAL rifle. Toronto: Collector Grade Publications. ISBN 0-88935-168-6.
  • Popenker, Maxim; Anthony G. Willams (2005). Assault Rifle. Ramsbury: Crowood Press Ltd. ISBN 1-86126-700-2.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.