14 Creating WiFi Access point on a single interface in Linux 2013-07-04T18:56:44.467
8 How to use NAT iptables rules for hostapd 2013-07-07T08:05:42.953
4 How do I use a single wireless adapter for both an access point and client on Raspberry Pi? 2013-06-26T06:14:27.787
4 Hostapd - bridge lan + wireless 2015-12-31T22:27:54.753
4 "iw" and some of its commands do not return any output 2016-03-08T03:26:15.073
4 Get all the IP addresses given out by DHCP Server with dnsmasq and hostapd 2017-08-08T07:23:33.503
3 hostapd: clients cannot connect 2011-10-14T12:38:22.450
3 IP forwarding from one interface to another on Debian 7 2014-05-21T13:34:12.530
3 TL-WN725N Access-Point on ArchLinux + Hostapd 2014-05-31T12:34:13.940
3 hostapd: execute a command when there is new connection established 2016-04-29T16:54:52.157
2 Ubuntu/Gentoo tower as router and bridge 2012-02-09T08:20:23.823
2 Problems setting TL-WN951N (AR5416/AR5008) into Master mode 2012-10-09T14:38:09.837
2 really disable power save in linux wifi 2013-10-21T20:04:13.927
2 clients can't connect to hostapd on raspberry pi 2014-03-02T13:05:03.100
2 wpa_supplicant commands on openwrt 2015-01-07T10:20:11.427
2 How do I reach devices on a DIY wireless access point? (different subnet) 2015-03-06T08:44:39.387
2 Why is hostapd in IEEE 802.11a (5Ghz) not starting on boot? 2017-11-01T15:12:52.873
2 How to disable AP isolation in Linux bridge? 2018-11-12T23:20:14.383
1 How to connect my Linux netbook (BCM4313) and Windows XP (Ralink USB) wirelessly? 2011-04-20T07:45:31.240
1 hostapd: Blacklist devices 2012-05-15T11:22:08.520
1 Debian Wheezy, hostapd running but no AP detected by clients 2012-10-10T13:16:51.957
1 Setting up a hotspot with hostapd 2012-11-21T19:50:20.023
1 How to set and adhoc network between my phone and laptop with static ip 2013-10-03T02:27:35.087
1 How can i setup multiple access points with multiple wifi cards on linux 2013-10-05T08:11:59.640
1 Hostapd requires manual restart for devices to connect 2013-11-17T01:12:49.367
1 How and why is this ubuntu system getting an ipv6 address? 2013-12-28T15:06:48.970
1 How does wlan interface receive 802.11 management frames? 2014-05-14T13:39:36.943
1 Raspbian - Can't spoof a MAC address through HostAPD 2014-08-23T10:30:30.963
1 hostapd + Ubuntu 14.04 Driver Issue for TL-WN725N v2 2015-03-24T15:02:27.973
1 hostapd & dnsmasq Obtaining IP forever 2015-06-24T21:30:21.303
1 Hostapd no internet on server 2015-10-18T11:27:22.303
1 802.11N in TP-LINK TL-WN722N 2016-02-04T15:31:38.137
1 Raspberry Pi iptables not working without active eth0 2016-02-22T23:56:30.497
1 IEEE 802.11:deauthicated due to local deauth request Respberry pi 2 jessie 2016-04-21T06:59:54.850
1 Get PSK of incorrect WPA-PSK attempts 2016-07-03T17:39:25.217
1 How can I make hostapd WPA2 work? 2016-07-28T21:16:33.443
1 udhcpd instance reports address already in use 2017-03-26T21:00:24.437
1 wlan0 to eth0 bridge works but MAC address gets mixed up 2017-06-17T23:19:27.127
1 Setting up hostapd in Fedora 25/26 2017-09-09T16:00:23.950
1 EAP (Re)authentification every 8:20 hours 2017-12-08T16:45:42.843
1 Unable to build wireless-regb and crda packages on Debian 9 “Stretch” from sources 2018-04-03T14:13:57.533
1 Embeded Software Linux HOSTAPD Connection Issues 2018-11-26T23:21:03.027
1 Hostapd , PI 3 not working , wifi disappeared after 1 to 3 days 2019-06-17T06:23:25.423
0 Stability problems with hostapd 0.7.3 on Ubuntu 12.04 x64 running kernel 3.2.0-58-generic with TP Link WN822N 2014-01-18T17:18:37.890
0 Is there a way to setup a hotspot with a domain name rather than IP address? 2014-06-07T08:46:04.070
0 How to setup access point that will work with newer devices (iPhone 5s, latest iPad, etc) 2014-06-09T06:24:55.300
0 Wi-Fi Adapter to use for 5GHz hostapd? 2014-07-02T14:29:30.313
0 Cannot install Hostapd in Porteus (Slackware) 2015-03-23T14:29:56.260
0 Hostapd doesn't work consistently to set up access point 2015-04-29T00:24:48.343
0 Where does device mode and state output come from, and how do I disable it? 2015-05-19T16:11:38.723
0 How to override wifi broadcast speed limit? 2015-07-28T19:57:17.957
0 How to get status information from hostapd? 2015-07-31T21:17:57.363
0 hostapd client associates, does not receive IP address 2016-02-09T14:19:11.083
0 Debian hostapd internet ip routing 2016-06-06T03:05:42.817
0 systemd run script before network up 2016-08-31T23:19:07.470
0 Hostapd giving psk mismatch for fitbit aria scale 2017-02-20T05:26:42.957
0 Using two USB wifi adapters as one single WAP (wireless access point) 2017-05-21T08:38:20.790
0 wlan0 bridge to eth0 works but eth0 gets no internet 2017-06-17T17:32:47.973
0 Raspberry pi : hostapd driver error 2017-12-29T09:53:09.580
0 Wifi AP to OpenVPN + stunnel gateway on Debian/Ubuntu 2018-02-02T00:44:15.297
0 Record incorrect password/key used to attempt to connect to hostapd network 2018-03-10T04:33:17.537
0 Unable to ping locally with iptables masquerade wifi repeater 2018-03-24T10:22:55.570
0 How do you setup Raspbian Stretch as wireless-only router with Internet access? 2018-03-31T02:22:49.137
0 dhcp wi-fi server on raspberry with hostapd without dns forwarding 2018-05-03T13:26:48.193
0 Ralink RT5572 based wireless adapter not working in AP mode in 5 GHz band with DFS 2018-05-28T17:57:29.667
0 Client of hostapd could not ping gateway 2018-10-15T07:44:29.767
0 Connecting to a headless machine that is connected to a hotspot connected to my main network 2018-12-03T03:24:23.263
0 Linux-Create AP that gets internet from client 2019-01-25T13:38:59.897
0 Wireless adapters no longer interfacable 2019-04-01T00:25:02.873
0 How to operate two hostapd adapters concurrently 2019-04-12T20:09:10.790
0 802.1x setup on CentOS 7 2019-09-12T23:13:15.933
0 How can I set ip addres for wlan adapter using systemd? 2019-09-16T12:04:58.253
0 hostapd: Windows 10 Clients Re-Auth loops 2019-09-19T12:22:43.473
0 hostapd disconnect my clients when browsing (Raspberry Pi) 2019-10-20T21:06:06.730
0 How to create multiple hotspots with hostapd? 2019-11-11T23:40:45.933
0 Raspberry Pi 4 hostapd hotspot not visible 2019-11-21T07:19:54.263
0 Hostapd - detect and execute command when a device is connected - error 2019-12-20T12:39:53.610
0 Why is it that when I bridge eth0 wlan0 connections to create an access point, the system no longer has an internet connection? 2020-01-04T02:00:02.147
0 Start hostapd service via python script with choice and authentication 2020-01-08T17:55:22.367
-1 How to create bridge with hostapd 2013-07-10T21:37:20.853
-1 nl80211: Failed to set channel: -22 (Invalid argument) 2017-05-13T11:31:28.477