0
1
Recently I've upgraded to windows 10 and facing a problem with connecting to my workplace cisco vpn. Cisco vpn client refused to work. So I opted to install shrew soft vpn client. It says tunnel enabled but then no traffic seems to pass. I can't ping or do RDP or ssh to the necessary servers. Can anyone be of any assistance? Thanks in advance.
Some logs:
config loaded for site 'IP'
attached to key daemon ...
peer configured
iskamp proposal configured
esp proposal configured
ipcomp proposal configured
client configured
local id configured
remote id configured
pre-shared key configured
bringing up tunnel ...
network device configured
tunnel enabled
MIHAFIZ
Posted 2015-08-23T00:12:03.217
Reputation: 1
Which version of shrew are you using? – algiogia – 2015-09-08T08:47:21.043
Standard edition of 2.2.2-release. – MIHAFIZ – 2015-09-10T01:40:47.063
I managed reinstalling Shrew and restarting Windows. It actually took a few attempts as I tried with older versions. I finally reinstalled 2.2.2 then had to reboot 2 times and it worked. – algiogia – 2015-09-10T09:51:58.543
I had already reinstalled several times and rebooted system. But still the same problem. – MIHAFIZ – 2015-09-11T17:12:03.877