1
I want to connect Raspberry PI to internet over network bridge on my laptop. It's Windows 8.1 machine. I've bridged ethernet and wireless interfaces. Raspberry PI has a static IP address. I was trying as the following tutorial says.
Router 192.168.1.1
Windows 192.168.1.15
Raspberry PI 192.168.1.100
I can ping router and Raspberry from PC, also PC from Raspberry. The problem is when i try to ping Router or google.pl from Raspberry:
pi@raspberrypi ~ $ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
^C
--- 192.168.1.1 ping statistics ---
8 packets transmitted, 0 received, 100% packet loss, time 7006ms
The firewall on PC is turned off. Here is ifconfig
:
pi@raspberrypi ~ $ ifconfig eth0
eth0 Link encap:Ethernet HWaddr b8:27:eb:9a:ea:1d
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1796 errors:0 dropped:0 overruns:0 frame:0
TX packets:426 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:133358 (130.2 KiB) TX bytes:54438 (53.1 KiB)
Routing table:
pi@raspberrypi ~ $ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
ARP table:
pi@raspberrypi ~ $ arp -n
Address HWtype HWaddress Flags Mask Iface
192.168.1.1 ether 88:ae:1d:7e:07:2f C eth0
192.168.1.15 ether 88:ae:1d:7e:07:2f C eth0
and interfaces
pi@raspberrypi ~ $ cat /etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
gateway 192.168.1.1
allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
I've tried manipulating with interfaces, default gateway, nothing seems working.
ipconfig -all
from windows is here
Ipconfig /all from Windows, please? – Canadian Luke – 2014-11-27T20:08:42.777
Luke, thank you for answer, the ipconfig -all is here: link
– johnatann – 2014-11-27T23:54:25.673