I am reading your setup in two possible ways: First of all the classic setup
![Picure with the OPs network](../../I/static/images/96764fa7030ba60c313cdd9f88ab61d62b44f0682bf90d9090c98c882e4afe1e.png)
This picture has your LAN network in the 192.168.1.0/24 range and uses 121.54.x.x for your public WAN IP.
When I try to access it by using my routers WAN IP through 8080 it connects through
my computer, but when i try it remotely it doesn't.
When on your LAN your devices should connect to the router via 192.168.1.1:8080.
This should work for all devices on the LAN. Regardless if they are wired (as the desktop and the server in the picture) or wireless (e.g. laptop, iPhone using wireless). Some routers have an option which forbids wireless access even from inside the LAN.
You usually can not connect to the router from the inside using the outside IP.
Read: Trying to connect to the router using 121.54.x.x:8080 should not work from the devices with a green IP.
The opposite is try when you try to to connect from the outside (the WAN side) of your router. In that case you approach from 'the red side' and you need to use 121.54.x.x:8080.
You should be able to test this via any normal computer on the Internet. E.g. a server at a university, some random PC at work, and maybe even from your iPhone using GPRS or its successors.
Caveeat: Many mobile networks use an extrea layer of NATting and this may interfere. Mobile phones and thus not a good object to test with.
Alternatve, you used the right description and actually have 192.168.x.x. as WAN, then you have the situation as below:
![WAN 192.168 just in case](../../I/static/images/6a432361ab0b646e57a92e4738246e26132479314527ac5ba9f13e9ac12a89b8.png)
Why is my public IP different from the WAN IP my router says?
Your provider may use an extra layer of NATting. Or maybe the ISP is using a webproxy and whatismyip.com answers with the IP of the proxy?
I don't understand why this is. I am using my iPhone's connection to access it
How are you using your phone? via Wireless (LAN) or via GPRS/G3/G4/whatever ?
What are your LAN ip ranges? Are they actually different from the IPs used on the WAN?
Is you Asus router you only device and does it plug directly into the ethernet jack of your fibre/DSL-modem? Is that a normal modem or a complex device which also tries to do NAT? In that case the second router might actually be in your home rather than at your ISP. (or worst case, you might be doing an extra NAT layer at home and the ISP may be doing that).
Why is hosting an SSL enabled webserver an exception? Can't the connection handle both? – ArcaneDominion – 2016-01-05T13:25:33.043
I would also recommend turning on HTTPS for your Web GUI... Unless you're hosting an SSL enabled webserver... – Kinnectus – 2014-05-29T07:45:33.577