0
Every time I want to connect to a new machine I am allowed to connect(wire) to the internet the next day. Once connected I can disconnect for hours and I get the internet again. The router is set to ´DHCP´ as well as the machine that I connected yesterday.
my settings on running computer (connected via switch Netgear) where Default Gateway IP
is available:
Windows IP Configuration
Host Name . . . . . . . . . . . . : xxxxxxxxxxxxxx
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : netgear.com
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : TAP-Win32 Adapter V9
Physical Address. . . . . . . . . : xxxxxxxxxxxxxxxxxxxxx
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : netgear.com
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
Physical Address. . . . . . . . . : xxxxxxxxxxxxxx
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.xx
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 216.146.35.35
216.146.36.36
192.168.1.1
Lease Obtained. . . . . . . . . . : den 5 december 2012 12:25:18
Lease Expires . . . . . . . . . . : den 5 december 2012 13:25:18
today I got the internet connection leaving the machine open for whole night. ipconfig /all
shows me this (without default gateway)
Host Name . . . . . . . . . . . . : xxxxxxx
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : netgear.com
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : TAP-Win32 Adapter V9
Physical Address. . . . . . . . . : 00-FF-F8-57-C4-6E
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : netgear.com
Description . . . . . . . . . . . : Attansic L1 Gigabit Ethernet 10/100/1000B
ase-T Controller
Physical Address. . . . . . . . . : xxxxxxxxxxxxxxxxxxx
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : xx.yy.23.65
Subnet Mask . . . . . . . . . . . : 255.255.240.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : xx.yy.16.1
DNS Servers . . . . . . . . . . . : 216.146.35.35
192.168.1.1
192.168.0.1
Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 11:54:54 AM
Lease Expires . . . . . . . . . . : Thursday, December 06, 2012 12:54:54 PM
Is there anything I am missing? Some information how it happens and why ? There is another question I asked yesterday. Not being able to understand quite good I have changed the perspective & details in the question.
route print
gives me this:
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 85.228.23.69 20
85.228.16.0 255.255.240.0 85.228.23.69 85.228.23.69 20
85.228.23.69 255.255.255.255 127.0.0.1 127.0.0.1 20
85.255.255.255 255.255.255.255 85.228.23.69 85.228.23.69 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 85.228.23.69 85.228.23.69 20
255.255.255.255 255.255.255.255 85.228.23.69 85.228.23.69 1
255.255.255.255 255.255.255.255 85.228.23.69 2 1
Default Gateway: 192.168.1.1
===========================================================================
Persistent Routes:
None
Your subnet mask has changed as well. You seem to be connected to a different network there. Do you have another (rouge) DHCP-server in your network? Or do you accidently mix up two independent networks? – gertvdijk – 2012-12-06T13:42:10.920
have you checked the output of 'route print'? IIRC if a gateway is not specified for a network, packets addressed to remote networks are sent out the interface that is up. since you only have one up interface that makes the decision easy. – Frank Thomas – 2012-12-06T13:45:24.353
@FrankThomas I have by now edited with results of
route print
hope helps identify the problem. Yes I do have two networks one from the switch and other from the direct router Netgear. – tough – 2012-12-06T14:04:08.583@gertvdijk It shows me the
Default Gateway
when useroute print
. Do not really understand what is going on. – tough – 2012-12-06T14:13:20.5501interesting. assuming that your 'Attansic L1' interface is on the 85.228.23.x subnet (looks like it is) there is a default gateway defined. I note that the gateway address is 192.168.1.1, which is not a reachable network, but the exit interface is defined, which is sufficient as long as the end system does not attempt to arp the gateway. – Frank Thomas – 2012-12-06T14:51:19.163
@FrankThomas Thanks, could you post it as a answer? I then tried to remove the manually added gateway´192.168.1.1´ , with ´ipconfig [release/renew]´ I got the new Gateway automatically. Would you please try to see the linked question please its a bit related, some hints may hit some solution. – tough – 2012-12-06T15:25:02.150