1
3
The number of subnets depends on the number of borrowed bits, but with the number of usable host is the thing that is not clear to me just like in this example.. I don't know where did the raised number come from....
1
3
The number of subnets depends on the number of borrowed bits, but with the number of usable host is the thing that is not clear to me just like in this example.. I don't know where did the raised number come from....
2
Every IP address can be split into two parts: a "prefix", which basically specifies which network the associated host is on, and a host number on that network. An address can thus be considered to have a "netmask" or "prefix length", which determines where that split occurs (ie: which bits are in the prefix vs the host address). This information is often shown in one of two forms:
255.255.255.192
; or255.255.255.192
netmask has 26 one-bits, so an address with that netmask would look like 192.168.1.37
/26
.)The 216, 211, etc come from the number of bits in the host part of the address -- that is, the number of bits not taken up by the prefix. The exponent is equal to the number of zero-bits in the netmask, or (32 - the prefix length). For example, the netmask for 192.168.1.0/26
has (32 - 26) == 6 zero-bits, so there are 26 == 64 possible addresses on that network.
There are two special addresses, though, which is where the "- 2" in the math comes from. If the host-part of the address has all bits 0, that's the network address and is considered semi-special. If they're all 1, it's the broadcast address for that subnet. Most networks will not assign either of those addresses to hosts on the network, as all sorts of wackiness could ensue.
With all that said, it looks like your example pic considers the effect of splitting an existing /16 ("class B") address block into smaller subnets by "borrowing" bits from the host part of the address to lengthen the prefix.