1
I'm newbie in Solaris and I need network driver 64bit for: -
pci bus 0x0004 cardnum 0x00 function 0x00: vendor 0x1186 device 0x4b01 D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) STATUS 0x02b0 COMMAND 0x0117 CLASS 0x02 0x00 0x00 REVISION 0x11 BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10 BASE0 0xfe1fc000 addr 0xfe1fc000 MEM BASE1 0x0000dc01 addr 0x0000dc00 I/O BASEROM 0xfe200000 addr 0xfe200000 not-decode-enabled MAX_LAT 0x1f MIN_GNT 0x17 INT_PIN 0x01 INT_LINE 0x0b BYTE_0 0x00 BYTE_1 0x00 BYTE_2 0xf0 BYTE_3 0x05
OS version: Sun OS 5.10 generic-137138-09(10/08)
I have found driver 32bit something called skgesol_x86v8.19.1.3 but it doesn't work. It asked me for the 64 version. Where I can find this driver?
Can you find out the card's chip? You may be able to get Solaris drivers at the chip manufacturer's site. Also the behavior is strange. I know that skge works fine in 64 bits, but it's questionable if that is the right driver for your card. – AndrejaKo – 2012-01-20T12:56:27.130
Read this article. It's related to your card. Unfortunately, it seems that Marvell removed Solaris drivers from its website.
– AndrejaKo – 2012-01-20T13:03:12.12788E8001-LKJ1 AK5LR.2. 0836 A4pTW these on the chip/ on the green broad DGE-530T REV-B2 8DGE530T.1B2G/ Do you have other ideas?Thank you again – Fanar ALHAYALI – 2012-01-20T14:14:40.663
As I said, the articel I linked to is related to your card. It used Marvell Yukon 88E8001 chip which is supported by the skge driver, but Marvell chose to remove it from its website. I can't give any better idea than to use Google and try to find the driver. – AndrejaKo – 2012-01-20T19:16:26.557