Duplicate window across monitors

I have a notebook with a projector attached. Normally I would set my the desktop to extend to the projector screen in Window's settings. I'm required to type something which should be seen by the audience. The projection is behind me so it's a bit tedious to type without seeing actually what I type.

All other windows should not be duplicated therefore the "duplicate the screen" option is not an option for me.

Is there any kind of software available with duplicates the window so I could put one of them on the projector screen?

neo

Posted 2010-12-15T18:01:22.100

Reputation: 193

Answers

UltraMon will do exactly what you want with its mirroring feature. It's available for for Windows 8, 7, Vista and XP.

For any OS X users that might stumble upon this, there's DuplicateWindows.

afrazier

Posted 2010-12-15T18:01:22.100

Reputation: 21 316

UltraMon sounds promising, I'll report back (and of course accept if it works) – neo – 2010-12-15T22:08:49.190

This is going to be dependent on your laptop and video drivers, but most of them offer a "mirror" mode that will display the same image on both your laptop screen and the external monitor. You'll have to dig around the Display Properties Control Panel (Go to the Settings Tab, you'll probably have to click "Advanced").

One thing to keep in mind: You can really only run in resolutions that both monitors support. This almost always means lowering your laptop's panel to the projector's resolution. However, when you need that functionality it's a minor setback.

Also, I believe that Windows 7 has this functionality built in as an extension to the multimon support.

afrazier

Posted 2010-12-15T18:01:22.100

Reputation: 21 316

Sorry, forgot to mention in my question that I need one window not to be shown to the audience. Therefore this is not a possibility for me. – neo – 2010-12-15T18:13:58.067

You'll want to edit your question to add that requirement then, so anyone else who comes along sees it. Not everyone reads all the comments. – afrazier – 2010-12-15T18:15:28.143

Did this already. – neo – 2010-12-15T18:16:48.373

With most notebooks you can also toggle between selections of display modes by pressing the Function and F8 key together.

dev1

Posted 2010-12-15T18:01:22.100

Reputation: 134

I found the following information at this link.

1.Connect the second display to the computer while it is turned off. Turn the computer on and allow Windows to load.

2.Right-click an open area of the desktop, and click "Properties." This brings up the display properties for your system.

3.Click the "Settings" tab.

4.Remove the check from the box labeled "Extend my Windows desktop onto this monitor."

5.Click "OK." The second monitor will immediately begin to display exactly what is shown on the primary monitor.

Hope this helps. If you need any more help, comment back!

David

Posted 2010-12-15T18:01:22.100

Reputation: 6 975