2
I m working in a private firm. We have two offices at different places. In one office there are a set of computers connected through LAN. These computers are assigned private IP addresses as given by ISP
Apart from that the ISP has also given a set of 5 public addresses. Now from the other office I want to access these computers through VPN. Please guide me the steps to setup the VPN.
sumit
Posted 2010-09-03T20:40:16.563
Reputation: 153
1
These 2 URLs helped me a lot when I was trying to setup VPN.
http://www.wbitt.com/contributed-howtos/145-openvpn-over-virtual-private-server-vps.html
http://www.webhostingtalk.com/showthread.php?t=595436&highlight=howto+openvpn
Sabeen Malik
Posted 2010-09-03T20:40:16.563
Reputation: 111
thanx for your response – sumit – 2010-09-03T21:01:47.890
do you have some more links – sumit – 2010-09-03T22:33:49.060
the links are good..but i need some more information..basically i just want to know that if i want to connect to a particular Lan system then how can i connect it..because that system has private IP and i can access the system only through public IP. – sumit – 2010-09-04T00:45:39.390
0
For your configuration you need point-to-point VPN tunnel btw 2 locations.
Equipment depends of your budget
Top level:
Cisco Pix 501-506 series the best for small offices. most expensive. ($1000 and up) You do need to know minimum cisco basic to configure.
WhatchGuard Firebox Edge E series ($800-$1000) Web based configuration. Still expensive but easy to configure than Cisco
Entry Level:
Linksys RVS4000 series (about $250)
Netgear FVS318 series (about $250)
Also check your other question you've asked.
I post some info for you
S.T.A.L.K.E.R.
Posted 2010-09-03T20:40:16.563
Reputation: 464
You will probably get more help on SuperUser or ServerFault. – Brendan Long – 2010-09-03T20:42:57.610