How I can configure as router

1

I bought AR9331 which installed OpenWrt (GL-iNet 6408A) AR9331

Also, there is WiFi(wlan0), and two ethernet port [eth0, eth1].
One ethernet port is configured as WAN (eth0).

Also, there is bridge with wlan0, and eth1. The bridge ip is 192.168.1.1

Also, I can connect with my laptop via wifi, and I can access openwrt luci with 192.168.1.1.

But, with ethernet cable(laptop eth0 <-> AR9331 eth1), I cannot connect to AR9331.

I want connect my laptop with ethernet ( eth1 ).
How I can connect with ethernet cable via 192.168.1.1?

King Stone

Posted 2019-09-22T07:04:57.963

Reputation: 61

Question was closed 2019-09-22T08:57:01.497

What's the device model? – Tim_Stewart – 2019-09-22T20:22:25.317

My device model is GL-iNet 6408A – King Stone – 2019-09-23T01:34:42.910

1

It should be giving an IP out on eth0. Also, you are supposed to update the firmware before you deploy it. https://dl.gl-inet.com/firmware/mt300n-v2/v1/

– Tim_Stewart – 2019-09-23T06:16:33.350

No answers

Asked: 2019-09-22T07:04:57.963

Viewed: 75 times

Active: 2019-09-23T01:34:11.910