The MicroBlade Server can not use two ports

0

Using SuperMicro network module, which related to Intel SDN product, the command PDF . and the Web GUI manual.

the product is: MicroBlade.

Now my problem is:

I started 3 nodes of the MicroBlade. you see there lighted 3 ports. they are 1, 3, 5, and the 1, 3, 5 ports works fine.

enter image description here

but I have a problem, I want the three server use the other network adapter.

the bellow is one of my started server.

enter image description here

seems the other network adapter is not connected to the Switch module. you also can see the first image, the 2, 4, 6 port are Down status.

there I guess every server use two ports of the switch module. such as server1 use 1 and 2 ports.

so, how can I let server1 use the 2 port?

I tried no shutdown the xe2, but no use.

enter image description here

244boy

Posted 2019-01-13T03:06:01.957

Reputation: 263

Check whether the network port corresponding to Onboard LAN2 on server1 is connected to port 2 on the switch. – Daisy Zhou – 2019-01-13T08:10:12.597

this is a switch module, not there is no lines. – 244boy – 2019-01-13T09:23:45.883

If switch module is a physical one or virtual one? If it is a physical one, we need to connect it with physical network cable. – Daisy Zhou – 2019-01-16T10:10:29.783

No answers

Asked: 2019-01-13T03:06:01.957

Viewed: 66 times

Active: 2019-01-13T03:06:01.957