2
I have currently a trunk port connected on one host that runs VMWare Workstation 14. I would like to have 2 VMs running on that host and each one to be part of a different VLAN.
My VLANS are: VLAN10 - 172.0.10.0/24 and VLAN20 172.0.20.0/24.
On my host, on my NIC configuration I was able to set the VLAN ID and be part of the VLAN, which means my trunk works.
How can I setup my VMs now to use those VLANs? Note: The host should not be part of any VLAN, only the VMs. Our environment cannot support 2 different NICs. Only one NIC should be used.
I spent a lot of time reading on the internet but there is not a clear answer if Workstation supports that or how to do it.