2
1
Environnement :
- Host OS : Windows 10
- VM software : VMWare Workstation 14 Player
- Guest OS : CentOS 7
I've being using the NAT network setting previously and it worked fine. Now I need to use the "briged" one.
Unfortunately, it doesn't work. Here's ifconfig result :
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::ee21:cafd:3c40:dff8 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:6e:3a:3c txqueuelen 1000 (Ethernet)
RX packets 1 bytes 79 (79.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 414 bytes 80340 (78.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 496 bytes 42672 (41.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 496 bytes 42672 (41.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:52:f2:7e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0-nic: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 52:54:00:52:f2:7e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dhclient -v command gives me :
No DHCPOFFERS received.
Any idea why I can't connect? Thanks in advance
Gabriel
Posted 2018-04-23T09:01:37.093
Reputation: 71
I had the same problem as described in the question. Disabling all but the physical interfaces solved the problem. In the image above, I would have only checked the two Intel network adapters. – jrast – 2019-05-19T20:48:21.980