Bluetoothctl connects and disconnects repeatedly

Question

I am using a Raspberry Pi Zero with a Iot pHat and was able to ssh into the Pi using a USB cable using this tutorial. I then set up my home WiFi with the pHat. Then I powered up the Pi with a separate power source. I could then ssh into the Pi wirelessly through my home network.

Finally to my question. I would like to connect the Pi to a wireless keyboard. I am trying to use the bluetoothctl tool to connect it. When running scan on, the Pi recognizes the keyboard, but when pairing, it won't pair. Here is the terminal session:

[CHG] Device 0C:4D:12:11:01:E4 Name: Bluetooth Keyboard
[CHG] Device 0C:4D:12:11:01:E4 Alias: Bluetooth Keyboard
[bluetooth]# pair 0C:4D:12:11:01:E4
Attempting to pair with 0C:4D:12:11:01:E4
[CHG] Device 0C:4D:12:11:01:E4 Connected: yes
[CHG] Device 0C:4D:12:11:01:E4 Connected: no
[CHG] Device 0C:4D:12:11:01:E4 Connected: yes
[CHG] Device 0C:4D:12:11:01:E4 Connected: no
[CHG] Device 0C:4D:12:11:01:E4 Connected: yes
[CHG] Device 0C:4D:12:11:01:E4 Connected: no
[CHG] Device 0C:4D:12:11:01:E4 Connected: yes
Failed to pair: org.bluez.Error.AuthenticationFailed
[CHG] Device 0C:4D:12:11:01:E4 Connected: no

As you can see it seems like it connects and disconnects repeatedly.

Answer 1

try these steps;

• put the keyboard into pair mode (k380 you would hold the bt key you want to assign the device too)
• at pi console, run bluetoothctl
• type power on
• type agent on
• type pair 0C:4D:12:11:01:E4
• type the pair code into the keyboard as prompted
• type connect 0C:4D:12:11:01:E4
• type trust 0C:4D:12:11:01:E4
• type agent off
• type quit

hopefully you should have a bt keyboard connected. you may have to do additional work to ensure the BT will power on and pair on restart of the device.

you require to enable the agent so that keyboard can do the pair code thingy. some keyboards may vary.

hope this helps.