1
I have two routers:
1 Tenda TE-D303: Primary Router; Access to internet using WAN
2 Tenda N301: Secondary Router; To be used as a Range Extender
Problem is that as soon as I set N301 as a Universal Repeater, it works for maybe like 30sec, after which it becomes unresponsive. Opening its page shows 'connection timed out' and any computer connected to its secondary default network doesn't get an IP address (checked using ipconfig)
Please Help.
If you connect to N301 using ethernet cable does it work? – SeanClt – 2016-03-28T01:15:01.800
If you mean connecting a PC to N301 after setting it up as a repeater, then no, the problem remains the same. Connecting both the routers on the other hand, I need your help. Please note that it is not feasible for me to install it with a wired connection because of the placement of the routers. – RishabhX3576 – 2016-03-28T02:50:44.157
Then do as what my comment says and report the results – SeanClt – 2016-03-28T02:52:37.887
LAN cable from normal port of D303 to normal port of N301: – RishabhX3576 – 2016-03-28T03:17:20.960
LAN cable from normal port of D303 to normal port of N301(Factory Settings). Its IP changed from default 192.168.0.1 to 192.168.1.50, with DHCP range of 1-150: I can access the internet through N301's default hosted network. All the devices show up on D303's DHCP list. Universal repeater settings don't take any effect until I remove the LAN cable. If it were to, Wi-fi analyzer (android) would show two networks with the same SSID (which in my case is HomeNet). Once again, on removing the LAN cable, the Universal Router settings take effect and the above problems happen again. – RishabhX3576 – 2016-03-28T03:25:01.697