0
I recently purchased a Cisco Aironet 1830, I've configured it and it is working great. However I can not for the life of me find out how to disable broadcasting the SSID. Does anyone know a command I can run to disable it? or am I missing something in the GUI?
SYSTEM INFORMATION
MODEL: AIR-AP1832I-B-K9
SOFTWARE VERSION : 8.2.100.0
b14smith
Posted 2016-03-21T15:11:54.367
Reputation: 11
0
AP(config)#interface dot11Radio0
AP(config-if)#ssid
AP(config-if-ssid)#no guest-mode
That should do the trick. As far as the GUI there should be an SSID manager page and unchecking guest mode would do the same thing.
DrZoo
Posted 2016-03-21T15:11:54.367
Reputation: 8 101
I tried running the commands you suggested; however the AP is not letting me get into "config", if I run a "config ?" it only lists "boot Set boot parameters". Also as you stated above in the GUI, there is no section for SSID Management, I'm running the Cisco Mobility Express software. Thanks for your assistance – b14smith – 2016-03-22T12:27:58.183
0
(Cisco Controller) config>wlan broadcast-ssid disable (number of wlan) wlan must be disable before apply
marios
Posted 2016-03-21T15:11:54.367
Reputation: 1
correct, my apologizes. – b14smith – 2016-03-21T16:55:45.077