How do I tell Windows 7 to trust a particular network location?

Question

How do I tell Windows 7 to trust a particular network location? I'm not sure how to elaborate from the title of the question!

I keep getting popups aka "this location is not trusted".

I've mapped a network location to a drive and I want to trust it 100%, how do I do that?

Answer 1

Try this:

1. Start Menu > type 'Internet Options'.
2. Select Local intranet zone on the Security tab then click the Sites button
3. Click Advanced button
4. Enter file://[computer name]
5. Make sure 'Require server verification...' is unticked

Answer 2

Controlpanel - network - internet options - local intranet. Add site: fill ip. Change "automaticly recognize local intranet locations" to "trust all unc path's" (not exact naming, im to lazy to check it)

Answer 3

1. Open Control Panel and select Network and Sharing Center
2. In the Active Networks section of the Window, select the network you want to trust
3. A new dialog shows requesting the new Location for this network Select Home Network.

Despite the misguiding name, Home Network is used for networks you trust. The names may be somewhat confusing an unintuitive to the task at hand. But here's an explanation:

Networks in Windows 7 are divided in two major groups; Private and Public groups. Private groups are split into two types of networks; Home and Work networks. Private groups are thus networks with a good deal of trust between computers. The Public group only offers the Public Network.

This nomenclature is not chosen from the user perspective, but from the security point of view. That is, a Public Network is a network that needs a lot more protection. You use this type of network when connecting to Airports networks, or the many wireless access points out there. A Private Network (Work and Home) is a network where trust among computers is higher. Incidentally, the difference between these two is that computers under a Home Network configuration can only access other members of this network. Whereas on a Work Network, it is possible to do more including taking server roles.

In addition to core network configuration under Windows 7, Windows Firewall also works in conjunction with the chosen network by enabling or disabling access features. For instance, under a Public Network, Windows Firewall doesn't enable Network Discovery.

Answer 4

If you are trying to map a local folder to a drive in My computer, you should use the subst command. There is also a GUI application for managing your virtual drives called Visual Subst.

Answer 5

I have had the same problem during the creation of Excel file from Access Database. I solved the problem in this way: In Control Panel I completed the MS Access Installation from Microsoft Office Plus 2010 set up. There was some Access add-on not installed. Regards Davide

Answer 6

I've had this before when setting a mapped drive on a different subnet on a different domain. I went through all the trusted zone stuff.

I landed up having to put an entry in the hosts file so Windows 7 could resolve the IP to a name, after that Office Trust Centre allowed it