Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ubiquiti]

Ubiquiti Networks (also UBNT) is a manufacturer of network products, best known for its "UniFi" WiFi antennas and access points.

53 questions
1
vote
1 answer

Enterprise LAN based on Ubiquity

I work for a small company with ~180 users. We are planning a complete overhaul of our infrastrucure. My question is whether Ubiquity equipment is suitable for our task (which is explained below), or we should look for other vendors. The basic idea…
Eugene
  • 287
  • 1
  • 11
1
vote
0 answers

Hyper-V 2016 Teaming: 1 Gbps instead of 2 with Dynamic LACP?

I want to create a Teaming over both physical NICs to double the power of the virtual LAN (vLAN) on my Microsoft Hyper-V Core 2016 Testserver. In the "Server Manager" dialog I can create multiple types of teaming: Switch Independent (Teaming only…
dataCore
  • 206
  • 3
  • 7
1
vote
1 answer

How to handle a Site-to-Site VPN one site behind a Double-NAT

Goal: Establish a Site-to-Site VPN tunnel between an office and a remote-site behind a Double-NAT connection. (e.g 4G Hotspot with a CGNAT IP) (Remote Site Setup) LTE Modem: e.g Sierra Wireless Airlink GX450 - 4G Verizon LTE Hotspot / GPS -…
James
  • 1,117
  • 3
  • 9
  • 16
1
vote
1 answer

How come I can ping between 2 different VLANS?

I've been trying to find an answer to this question and even asked a CCNA I worked with but it still is not making sense. Here's the scenario: I have an office that has multiple rows of computers that only need to talk within each row. The entire…
greenMamBa
  • 111
  • 3
1
vote
1 answer

Wifi clients cannot roam between access points

We are setting up an office with a Ubiquiti Unifi Security Gateway and three UAP-AC access points. The controller is running on a local Linux machine. Most of the setup works fine. We are using a RADIUS server running on a Synology DS 2015xs for…
oceanhug
  • 121
  • 4
1
vote
0 answers

MAC address in arp table doesn't match actual MAC, why?

If I connect my laptop directly to the config port of a ubnt airFiber radio I can set a static IP to my laptop and access the default config page to change settings on the radio. When I look at the arp table on my windows laptop the MAC for the…
demiAdmin
  • 155
  • 1
  • 9
1
vote
0 answers

Issues configuring the access ports (ubiquiti)

We currently have issues configuring the access ports for our servers on our rack switches(USW-EnterpriseXG-24). Since we've learned that ubiquiti does currently not support switch stacking (vswitch) - we'd like to know how we can accomplish network…
wolki
  • 11
  • 2
1
vote
0 answers

UDM Pro Site-to-Site VPN issues

I just got the UDM Pro and got to setting up the Site-to-Site VPN. Everything seems to work, but I'm unable to add all 3 redundant subnets that I've got set up in my AWS VPC. It works fine with a one, but after adding another one, the first one…
vdemcak
  • 11
  • 2
1
vote
1 answer

Can Ubiquiti UniFi PoE switch be used as unmanaged switch before adopting?

I know some managed switches can just be used as an unmanaged switch out of the box, but I have a site with a UniFi US-16-150W PoE switch which nobody knows anything about how it is/was setup or passwords/controller information. My question is: Does…
codlord
  • 141
  • 4
1
vote
0 answers

Setup DMZ on Ubi USG-3P Router

I have a few hosts that sit outside our LAN on a subnet. I'd like to move them behind our USG-3P and use the LAN2 port as a DMZ for these hosts. I don't see any way to do this in the web admin. Even NAT would be fine if I could map multiple hosts…
andyknas
  • 113
  • 1
  • 7
1
vote
1 answer

UDM Pro Site To Site VPN with Domain Issues

I have 2 UDM Pro firewalls setup with a IPsec site to site VPN, the settings are the same for both VPNs (obviously the destination IPs are reversed for each unit) I can ping traffic with IP addresses both directions. I am unable to ping any host…
David
  • 11
  • 3
1
vote
0 answers

SFP port in ubiquiti switch says RX Fault

guys, so I recently bought an SFP cable to hook up to my server and my switch (Ubiquiti), but today, when I tried to hook everything up in the unifi controller in the port, I was connecting the SFP, I got an error saying RX Fault. I saw some posts…
DeadSec
  • 119
  • 10
1
vote
1 answer

Hyper-V Ubuntu-Server VM not connecting to Unifi USG

I have a network set up with 2 VLANs, one for personal interconnectivity and internet access for personal devices, and another one for non-trusted devices like IOT devices. Here's the network topology: In short I have two subnets and two VLANs.…
Stephen Fasciani
  • 13
  • 4
1
vote
1 answer

Stop Ubiquiti ICMP restrictions (two concurrent pings at once from same host for traceroute)

How do I change the Ubiquiti Security Gateway's default icmp restrictions from inside the LAN? It seems that my Ubiquiti Security Gateway's default settings will drop icmp packets if I'm doing more than one traceroute at a time, but I can't find any…
Michael Altfield
  • 525
  • 6
  • 18
0
votes
1 answer

Ubiquiti EdgeRouter uses default route over static when responding to ICMP

I need to have a working connection between two router devices and the subnets behind them. Everything else in the setup seems to work except one static route. Here is the basic information about my setup: Juniper: Vlan95 10.250.0.1/24 Vlan1 …
nyoatype
  • 65
  • 1
  • 8
1
2
3 4